Product Description
Strong motive power
Adopt Xinchai diesel engine series, large reserves of torque,
low fuel consumption and high economic efficiency.
High reliability
The reinforced PTO structure, large bearing capacity,
meets the requirements of different operation.
Imported high strength powder metallurgic clutch plate,
reliable transmission.
Efficient operation
Adopts 4×(1 + 1) ×2 compound transmission, 8F + 8R
gear, shuttle shift, side control, easy to operate.
Vertical double oil cylinder high pressure lifter, large lifting
force and good operation adaptability.
Optional for creeper gearbox , meets different working
conditions.
Comfortable operation
Hanging flat panel console, reasonable man-machine
engineering.
Full hydraulic steering system, flexible and comfortable
operation.
Optional for cab, comfortable driving space
After sales service
TDER always treat after-sale service more important than sale.
Nowadays more than 30 agents around the world can supply TDER professional after-sale service.
All the product of TDER supplied with one year or 2000 working hours (which occurs first) period quality warranty.
Detail clauses and policies please check our website and product certificate.
FAQ:
1.What Certificate do you have?
TDER workshop meet with the ISO9001:2008 Quality System. .
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients’ requirement?
TDER will try its best to meet all kinds of clients’ special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client’s need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first.
Details to see the TDER warranty policy for each model.
4.Can you produce the products labeled with the client’s brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
On T/T term 30% down payment is required in advance,and 70% balance shall be settled before shipment.
6.What logistics way we can work for shipment ?
We can ship construction machinery by various transportation tools
1.For 90% of our shipment,we will go by sea,to all main continents such as South America,Middle East,
Africa,Oceania and Europe etc,either by container or Bulk shipment.
2.For neighborhood countries of China,such as Russia,Mongolia, Kazakhstan,Uzbekistan etc., we can ship
trucksby railway.
3.For light spare parts in urgent demand,we can ship it by international courier service,such as DHL,TNT,
UPS,or Fedex.
7.Delivery time:
Standard configuration products are always in stock. The production period of Customizing products is from
7 days to 60 days.
|
Model
|
LTB604
|
LTB704
|
LTB804
|
LTB1004
|
LTB1204
|
|
Drive Type
|
4×4
|
||||
|
Overall Dimension L×W×H (mm)
|
3925×1728×2870
|
4070×1700×2870
|
4130×1720×2820
|
||
|
Overall Dimension with optional driver’s cab L×W×H (mm)
|
3925×1728×2650
|
4070×1700×2650
|
4130×1720×2650
|
||
|
Min. ground clearance (mm)
|
360
|
370
|
|||
|
Min. operating weight (KG)
|
2565
|
2720
|
2950
|
||
|
Gearbox gears number
|
12F+12R
|
||||
|
Forward Speed (Kw/h)
|
2.33-31.04
|
2.33-31.05
|
2.41-31.96
|
2.41-30.91
|
|
|
Reverse Speed (Kw/h)
|
2.04-27.21
|
2.04-27.22
|
2.11-27.14
|
2.11-27.1
|
|
|
Engine Brand
|
XINCHAI
|
QUANCHAI
|
QUANCHAI
|
||
|
Engine Model
|
4D32ZT31/604
|
4D32ZT31/704
|
4C6-80U32
|
4C6-100C35
|
4C6-120C32
|
|
Engine Rated power (Kw)
|
44.1
|
51.5
|
59
|
73.5
|
88.3
|
|
Engine Rated speed (r/min)
|
2400
|
||||
|
Front tires spec.
|
8.3-34
|
9.5-24
|
8.3-34
|
9.5-24
|
|
|
Rear tires spec.
|
11-32
|
14.9-30
|
11-32
|
14.9-30
|
|
|
Max. traction force (KN)
|
13.8
|
14
|
16.6
|
≥25
|
|
|
Fuel Tank Capacity (L)
|
60
|
60
|
60+25
|
||
|
Model
|
LTB604
|
LTB704
|
LTB804
|
LTB1004
|
LTB1204
|
|
Drive Type
|
4×4
|
||||
|
Overall Dimension L×W×H (mm)
|
3925×1728×2870
|
4070×1700×2870
|
4130×1720×2820
|
||
|
Overall Dimension with optional driver’s cab L×W×H (mm)
|
3925×1728×2650
|
4070×1700×2650
|
4130×1720×2650
|
||
|
Min. ground clearance (mm)
|
360
|
370
|
|||
|
Min. operating weight (KG)
|
2565
|
2720
|
2950
|
||
|
Gearbox gears number
|
12F+12R
|
||||
|
Forward Speed (Kw/h)
|
2.33-31.04
|
2.33-31.05
|
2.41-31.96
|
2.41-30.91
|
|
|
Reverse Speed (Kw/h)
|
2.04-27.21
|
2.04-27.22
|
2.11-27.14
|
2.11-27.1
|
|
|
Engine Brand
|
XINCHAI
|
QUANCHAI
|
QUANCHAI
|
||
|
Engine Model
|
4D32ZT31/604
|
4D32ZT31/704
|
4C6-80U32
|
4C6-100C35
|
4C6-120C32
|
|
Engine Rated power (Kw)
|
44.1
|
51.5
|
59
|
73.5
|
88.3
|
|
Engine Rated speed (r/min)
|
2400
|
||||
|
Front tires spec.
|
8.3-34
|
9.5-24
|
8.3-34
|
9.5-24
|
|
|
Rear tires spec.
|
11-32
|
14.9-30
|
11-32
|
14.9-30
|
|
|
Max. traction force (KN)
|
13.8
|
14
|
16.6
|
≥25
|
|
|
Fuel Tank Capacity (L)
|
60
|
60
|
60+25
|
||
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
