China best 315HP 8X4 CZPT 30 Cbm Aluminium Alloy Material Fuel Tank Oil Tank Truck for Sale pto shaft cover safety chain

Product Description

315hp 8×4 Xihu (West Lake) Dis.feng 30 cbm Aluminium Alloy Material Fuel Tank Oil Tank Truck for sale

 

ITEM UNIT PARAMETER
Vehicle   Fuel tank truck
Overall dimension mm 11980x2495x3300
Tank dimension mm 9100x2410x1680
GVW kg Appro×33170
Curb weight   Appro×12170 
Payload   Appro×21000
Wheel base mm 1300+4500+1350
F/R track base   2571/1830
Approach/departure angle ° 12/14
Suspension mm 1500/2905
Max speed km/h 95
Drive system 8×4 Steel Power
Tire specification 12.00-20 Number of axles 4
Engine model

 

Manufacturer Xihu (West Lake) Dis.feng Cummns
Model L315-30
Emission/kw 8900ml/230Kw, 315hp
Gear box 9F&2R
Emission standard Eu 3
Introduce 1, Tank made make of 4mm or 5mm high-quality aluminium alloy.
2, Tank is equipped with multi-channel anti-wave partitions. igh-pressure gas leak detection, make sure the tank has a high strength, the center of gravity is stable, safe and stable vehicle delivery and so on.
3, Fuel tank truck build by PTO, drive shaft, gear pump, tank, pipe network system. Pipe network system consists of oil pump, three-way four-ball valve, two-way ball valve, filter, pipe composition.

Oil tank truck: also known as mobile fuel truck, computer tax control fuel truck, oil tank truck, oil truck, oil truck, oil truck, oil transport truck, edible oil transport truck, mainly used for oil Transportation and storage of derivatives (gasoline, diesel, crude oil, lubricating oil and coal tar).
According to different purposes and use environment, there are a variety of fueling or oil transportation functions, with oil absorption, pump oil, a variety of oil dispensing, distribution and other functions. The special part of the oil truck is composed of a tank body, a power take-off, a drive shaft, a gear oil pump, a pipe network system and the like. The pipe network system consists of an oil pump, a three-way four-position ball valve, a two-way ball valve, a strainer, and a pipe.
Oil tank truck: According to the medium, configuration and various places of transportation, there are many different titles, such as: tank truck, tank truck, oil truck, fuel truck, oil truck, Mobile fuel trucks, tax-controlled fuel trucks, computer fuel trucks, diesel transport vehicles, gasoline transport vehicles, coal tar transport vehicles, lubricant transport vehicles, edible oil transport vehicles, crude oil transport vehicles, heavy oil transport vehicles, oil transport vehicles, etc.

Transport medium: suitable for transporting gasoline, kerosene, diesel, vegetable oil, edible oil, heavy oil, coal tar and non-petroleum products such as alcohol, aldehyde, benzene, ether and other liquid substances.
The tank material is made of high-quality 4-6mm thick carbon steel national standard plate. It can be made of carbon steel or stainless steel. If necessary, it can also use aluminum alloy, pure aluminum can, inner CZPT rubber, rotomolding, plastic can and glass steel can;
The tank type has a square shape, an ellipse shape, and a round shape;
The oil pump has a self-priming pump, a gear pump, and a double pump;
Can be designed as a special vehicle for chemical transportation;
Separate warehouses and separate different oils. It can realize pumping and pumping out, self-flowing, optional flow meter, computer tax control tanker, 15m refueling reel (can be automatically returned), and multiple anti-wave separators in the tank body, so that the tank body has high strength and center of gravity. Stable, safe and stable vehicle transport.
All tank trucks can be designed into chemical vehicles and various types of heating and insulation tanks; all tank trucks can be equipped with computer tankers; a wide range of upper tonnage selection to meet user needs; Road anti-wave separator. The high-pressure gas leak detection is used to make the tank have high strength, stable center of gravity, and safe and stable vehicle transportation.

According to its appearance, tank trucks can be divided into: flat head tank truck, pointed tank truck, Qitou tank truck, single bridge tanker, rear double bridge tanker, double bridge tanker, double rear axle Tank trucks, light tank trucks, small tank trucks, medium tank trucks, large tank trucks, semi-trailer tankers, small three-axle tankers, front double rear tankers, front 4 rear tanks Car, front and rear 8 tankers, etc.
According to the brand, tank trucks can be divided into: Yuejin tanker, Xihu (West Lake) Dis.feng tanker, liberation tanker, Xihu (West Lake) Dis. tanker, heavy gasoline tanker, CZPT tanker, Beiben tanker, Xihu (West Lake) Dis.i Oil tanker, ZheJiang gasoline tanker, Hualing oil tanker, CZPT tanker, Qingling tanker, Xihu (West Lake) Dis. tanker, Xihu (West Lake) Dis.n tanker, etc.

Our Factory

Products Display

Cooperative Partner

Qualification Certificate

 Packaging & Shipping

Cooperative Brand

FAQ
1.You are factory or trading Company?
Yes, we are oversea sales department of CZPT automobile. And you are always welcomed to visit our factory.

2.Could your company modify the standard product depends on my request? 
Yes. Our company is specialized in researching and designing various of special purpose vehicle and spare parts. We can provide any product according to your demand.

3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demand.

4. Could you provide certification that we need?
We can provide various certifications associate with trailer and truck. Such as DOT, ADR, SASO and so on.
 
5. How long could we receive our goods?
 It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.

6. How about the after-sale service?
We can provide you the technical support to guide you repaire your product. And we will also send original spare parts free of charge by air. If you have special need, we can let our engineer to help you in person

Contact us
 

Transmission Type: Manual
Power: Diesel
Load Capacity: 21-30t
Emission Standard: Euro 3
Tank Volume: >30000L
Drive Wheel: 8×4
Customization:
Available

|

Customized Request

Shaft Collar

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China best 315HP 8X4 CZPT 30 Cbm Aluminium Alloy Material Fuel Tank Oil Tank Truck for Sale   pto shaft cover safety chainChina best 315HP 8X4 CZPT 30 Cbm Aluminium Alloy Material Fuel Tank Oil Tank Truck for Sale   pto shaft cover safety chain
editor by CX