Tag Archives: shaft alignment

China Drive Shaft Couplings Crank Gear Square Shredder Machine Double Propeller Steering Alignment Flexible Hub Motor Pool Cue Stainless Steel Splined Shafts pto shaft danger

Solution Description

       Drive shaft couplings crank equipment sq. shredder device double propeller              steering alignment flexible hub motor pool cue  stainless metal splined shafts

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

Choosing the Right PTO for Your Machine

There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.

LPTO

LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Shaft Collar

Reverse PTO

There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.

Splined PTO

The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Shaft Collar

Independent PTO

Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.

LPTO shaft guard

An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Shaft Collar

Safety of handling a pto shaft

Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
China Drive Shaft Couplings Crank Gear Square Shredder Machine Double Propeller Steering Alignment Flexible Hub Motor Pool Cue Stainless Steel Splined Shafts     pto shaft dangerChina Drive Shaft Couplings Crank Gear Square Shredder Machine Double Propeller Steering Alignment Flexible Hub Motor Pool Cue Stainless Steel Splined Shafts     pto shaft danger
editor by czh 2023-01-24

China Exported SWC-I225A Type Cardan Shaft/Propshaft/Universal Shaft pto shaft alignment

Solution Description

HangZhou  Xihu (West Lake) Dis. common shafts Co.,LTD  is a major  professional manufacturer of cardan shafts in China. It is located in HangZhou ,ZheJiang Province. Our company has focused on the analysis and development , layout and manufacture with different kinds of cardan shafts for practically 15 a long time.

Our producted cardan shafts are widely used in domestic large metal enterprises, these kinds of as ZheJiang Baosteel, HangZhou Iron and Metal Corporation, HangZhou Metal Corp and other domestic large-scale iron and steel enterprises.Now far more merchandise are exported to Europe, North The usa and Southeast Asia and other areas.

Our cardan shafts can be utilised to resist vibration and affect in the severe atmosphere of steel rolling, and the services daily life of cardan shafts is lengthier. We can also customise the special link modes of cardan shafts in accordance of customers’ demands .High precision, adaptable joints, easy set up, ideal soon after-income service and so on are highlight functions of our goods.  

SWC-I Sequence-Light-weight-Responsibility Designs Cardan shaft
Designs

Info and Dimension of SWC-I Sequence Universal Joint Couplings
 

Sort Desian
Data
Item
SWC-I
   58 
SWC-I
   65
SWC-I
   75
SWC-I
  90
SWC-I
  100
SWC-I
120
SWC-I
one hundred fifty
SWC-I
one hundred eighty
SWC-I
200
SWC-I
225
A L 255 285 335 385 445 500 590 640 775 860
Lv 35 40 40 forty five fifty five 80 eighty eighty one hundred a hundred and twenty
m(kg) two.two three. 5. 6.6 9.5 seventeen 32 forty 76 128
B L 150 one hundred seventy five two hundred 240 260 295 370 430 530 600
m(kg) one.7 two.four three.8 five.7 seven.7 13.1 23 28 55 ninety eight
C L 128 156 180 208 220 252 340 348 440 480
m(kg) 1.3 1.95 three.one five. 7. twelve.3 22 30 fifty six 96
  Tn(N·m) one hundred fifty 200 400 750 1250 2500 4500 8400 16000 22000
  Tf(N·m) 75 one hundred two hundred 375 630 1250 2250 4200 8000 11000
  β(°) 35 35 35 35 35 35 35 25 25 25
  D 52 63 seventy two ninety two a hundred 112 142 154 187 204
  Df fifty eight sixty five 75 90 a hundred 120 a hundred and fifty one hundred eighty 200 225
  D1 forty seven 52 62 seventy four.five 84 a hundred and one.five a hundred thirty a hundred and fifty five.5 a hundred and seventy 196
  D2(H9) 30 35 forty two 47 57 seventy five 90 a hundred and ten 125 one hundred forty
  D3 38 38 4 50 sixty 70 89 102 114 one hundred forty
  Lm 32 39 45 52 fifty five 63 eighty five 87 one hundred ten 120
  k 3.5 4.five 5.5 six. eight. eight. 10. twelve. 14. fifteen.
  t 1.5 1.seven two. 2.5 two.5 2.five 3. four. 4. 5.
  n 4 4 6 4 6 eight 8 8 8 eight
  d 5.1 six.five 6.five 8.five eight.5 10.five thirteen 15 17 seventeen
  MI(kg) .14 .sixteen .38 .38 .fifty three .fifty three .87 .87 one.sixty five two.14
Flange bolt size M5 M6 M6 M8 M8 M10 M12 M14 M16 M16
Tightening torque(N·m) 7 13 13 32 32 sixty four one hundred ten a hundred and eighty 270 270

1. Notations: 
L=Standard length, or compressed length for designs with length compensation 
LV=Length compensation 
M=Weight 
Tn=Nominal torque(Yield torque 50% over Tn) 
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads 
β=Maximum deflection angle 
MI=weight per 100mm tube
2. Millimeters are used as measurement units except where noted 
three. Please consult us for customizations regarding length, length compensation and
Flange connections. 

Material: Alloy Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:

###

Type Desian
Data
Item
SWC-I
   58 
SWC-I
   65
SWC-I
   75
SWC-I
  90
SWC-I
  100
SWC-I
120
SWC-I
150
SWC-I
180
SWC-I
200
SWC-I
225
A L 255 285 335 385 445 500 590 640 775 860
Lv 35 40 40 45 55 80 80 80 100 120
m(kg) 2.2 3.0 5.0 6.6 9.5 17 32 40 76 128
B L 150 175 200 240 260 295 370 430 530 600
m(kg) 1.7 2.4 3.8 5.7 7.7 13.1 23 28 55 98
C L 128 156 180 208 220 252 340 348 440 480
m(kg) 1.3 1.95 3.1 5.0 7.0 12.3 22 30 56 96
  Tn(N·m) 150 200 400 750 1250 2500 4500 8400 16000 22000
  Tf(N·m) 75 100 200 375 630 1250 2250 4200 8000 11000
  β(°) 35 35 35 35 35 35 35 25 25 25
  D 52 63 72 92 100 112 142 154 187 204
  Df 58 65 75 90 100 120 150 180 200 225
  D1 47 52 62 74.5 84 101.5 130 155.5 170 196
  D2(H9) 30 35 42 47 57 75 90 110 125 140
  D3 38 38 4 50 60 70 89 102 114 140
  Lm 32 39 45 52 55 63 85 87 110 120
  k 3.5 4.5 5.5 6.0 8.0 8.0 10.0 12.0 14.0 15.0
  t 1.5 1.7 2.0 2.5 2.5 2.5 3.0 4.0 4.0 5.0
  n 4 4 6 4 6 8 8 8 8 8
  d 5.1 6.5 6.5 8.5 8.5 10.5 13 15 17 17
  MI(kg) 0.14 0.16 0.38 0.38 0.53 0.53 0.87 0.87 1.65 2.14
Flange bolt size M5 M6 M6 M8 M8 M10 M12 M14 M16 M16
Tightening torque(N·m) 7 13 13 32 32 64 110 180 270 270
Material: Alloy Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Customization:

###

Type Desian
Data
Item
SWC-I
   58 
SWC-I
   65
SWC-I
   75
SWC-I
  90
SWC-I
  100
SWC-I
120
SWC-I
150
SWC-I
180
SWC-I
200
SWC-I
225
A L 255 285 335 385 445 500 590 640 775 860
Lv 35 40 40 45 55 80 80 80 100 120
m(kg) 2.2 3.0 5.0 6.6 9.5 17 32 40 76 128
B L 150 175 200 240 260 295 370 430 530 600
m(kg) 1.7 2.4 3.8 5.7 7.7 13.1 23 28 55 98
C L 128 156 180 208 220 252 340 348 440 480
m(kg) 1.3 1.95 3.1 5.0 7.0 12.3 22 30 56 96
  Tn(N·m) 150 200 400 750 1250 2500 4500 8400 16000 22000
  Tf(N·m) 75 100 200 375 630 1250 2250 4200 8000 11000
  β(°) 35 35 35 35 35 35 35 25 25 25
  D 52 63 72 92 100 112 142 154 187 204
  Df 58 65 75 90 100 120 150 180 200 225
  D1 47 52 62 74.5 84 101.5 130 155.5 170 196
  D2(H9) 30 35 42 47 57 75 90 110 125 140
  D3 38 38 4 50 60 70 89 102 114 140
  Lm 32 39 45 52 55 63 85 87 110 120
  k 3.5 4.5 5.5 6.0 8.0 8.0 10.0 12.0 14.0 15.0
  t 1.5 1.7 2.0 2.5 2.5 2.5 3.0 4.0 4.0 5.0
  n 4 4 6 4 6 8 8 8 8 8
  d 5.1 6.5 6.5 8.5 8.5 10.5 13 15 17 17
  MI(kg) 0.14 0.16 0.38 0.38 0.53 0.53 0.87 0.87 1.65 2.14
Flange bolt size M5 M6 M6 M8 M8 M10 M12 M14 M16 M16
Tightening torque(N·m) 7 13 13 32 32 64 110 180 270 270

Choosing the Right PTO for Your Machine

There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.

LPTO

LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Shaft Collar

Reverse PTO

There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.

Splined PTO

The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Shaft Collar

Independent PTO

Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.

LPTO shaft guard

An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Shaft Collar

Safety of handling a pto shaft

Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
China Exported SWC-I225A Type Cardan Shaft/Propshaft/Universal Shaft     pto shaft alignmentChina Exported SWC-I225A Type Cardan Shaft/Propshaft/Universal Shaft     pto shaft alignment
editor by czh 2022-12-14