Product Description
Agricultural Machinery Parts Side Delivery Rake Gearbox
The gearbox is a designed to alter the output speed of your tractors PTO shaft. Its versatile design allows
the gearbox to be used as either an increasing ratio or decreasing ratio gearbox to suit your needs.
As a decreasing ratio gearbox it will reduce 1000 rpm PTO shaft speed to 540 rpm allowing the use of equipment designed to operate at 540 rpm.
As an increasing ratio gearbox it will increase 540 rpm PTO shaft speed to 1000 rpm.
The gearbox is assembled with 2 x internal splined sleeves. One 13/8″Z6 the other 13/4″Z20. These splined sleeves allow for direct coupling to your tractors PTO shaft as the input. The gearbox is also supplied with 2 x separate shafts with matching splines. These are easily assembled to give you the required output shaft.
| Ratio | Input RPM | HP | KW | SHAFT TYPE | |||
| INPUT | OUTPUT | ||||||
| 1.88;1 | 540 | 105 | 78.3 | 13/4″Z20 | 13/4″Z20 | 13/8″Z6 | 13/8″Z6 |
| 1000 | 120 | 89.5 | SHAFT | SLEEVE | SHAFT | ||
| 1:1.88 | 540 | 120 | 89.5 | 13/8″Z6 | 13/8″Z6 | 13/4″Z20 | 13/4″Z20 |
| SLEEVE | SHAFT | ||||||
| 1000 | 120 | 89.5 | |||||
GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice
CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014
SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.
POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working conditions are different,please contact LongQuan technical department.
LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.
Related Products
Factory
Extensive use for agricultural machines
Guarantee: High precision, high wear resistance, low noise, smooth and steady, high strength
Our factory
| Type: | Agricultural Gearbox |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machine |
| Material: | Carbon Steel |
| Power Source: | Electricity |
| Weight: | OEM |
| After-sales Service: | Installation Guide |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-06-02
China Custom Working Width 3m Power Driven Harrow for Farm Tractor 110-160HP Disc Pto True Vertical Tillage Powered Gearbox Driven Rotary Harrow Roller Heavy Duty Tiller CE bush hog pto shaft
Product Description
Made in China, Sold to the world
Versatile, Easy, Affordable, Powerful, Reliable
1BQ series Heavy duty power driven harrow product description
1BQ series Heavy duty power driven harrow product description
1BQ series Heavy duty power driven harrow is a cooperation between ZheJiang Euro Star Machinery Manufacture Co., Ltd. and Italian CMR Group Company, specially designed and produced for complex soil conditions, with reasonable structure, reliable performance, quick tool change, overload protection and other advantages.
1BQ series Heavy duty power driven harrow can choose working width of 2-4M, and can be used with 80-160HP tractors. It has the advantages of good soil crushing effect, smooth ground after soil preparation, good moisture retention effect, no damage to soil structure and layering, and neat seedbed emergence rate. It is the first choice for farm managers.
1BQ series Heavy duty power driven harrow a very good finishing effect especially for the unbreakable large clods and moisture ditch that appear after deep ploughing. In terms of seedbed and seedbed finishing, the power-driven harrow is the best working machine at present. After finishing, it can meet the agronomic requirements of “flat, tidy, loose, broken, clean, and moisture content” of the land, providing perfect soil conditions for seed germination.
1BQ series Heavy duty power driven harrow product selling points
1. Strong soil crushing ability, specializing in unbreakable clods.
2. Strengthen the leveling board, which has a good finishing effect for the uneven land after deep ploughing. Ensure that the land is level and there is no moisture ditch.
3. Heavy-duty repression roller, the soil after finishing is CZPT on the top and the bottom is empty, so it can be directly sown, and the soil moisture is guaranteed to ensure that the seedbed emerges neatly.
4. Keep the soil structure layered. After deep ploughing, the straw and grass have been pressed into the soil. The horizontal rotating structure of the power-driven harrow and the characteristics of the knife shape will not turn the straw up, which is conducive to the rot and decomposition of the straw.
5. Adopt Italian CMR Group special transmission box, high-power spiral bevel gear design, strong bearing capacity.
6. The plug-in quick-change blade structure is convenient and quick to replace the rake.
7. Shafts and gears are made of titanium alloy and processed by advanced heat treatment process.
8. The 16mm thick alloy steel harrow blade is used, which has better wear resistance and strength after special treatment.
9. The high-density drum design is adopted, and more than 2 sets of drums are added to the common drive harrow, which improves the soil crushing effect.
10. The soil after deep ploughing will form a good seedbed and seedbed, and improve the neat emergence rate in the later stage.
11. Strengthen the gear box setting, strong and durable.
12. Primary transmission of main transmission box with higher strength.
13. Super large bearing is selected to reduce the failure rate.
14. The intermediate gear spline shaft and the main drive spline shaft are thicker and more durable.
5. The locking position of each group of gear plum CZPT cap and the large plum CZPT cap are locked, with simple structure and never loose.
1BQ series Heavy duty power driven harrow product parameters
| Model | 1BQ-2.0 | 1BQ-2.5 | 1BQ-3.0 | 1BQ-3.5 | 1BQ-4.0 |
| Working width(mm) | 2000 | 2500 | 3000 | 3500 | 4000 |
| Working depth(mm) | 50-200 | 50-200 | 50-200 | 50-200 | 50-200 |
| No of Rotating combination(pc) | 8 | 10 | 12 | 14 | 16 |
| No of Scraper blade(pc) | 16 | 20 | 24 | 28 | 32 |
| weight(KG) | 1200 | 1400 | 1620 | 1880 | 2080 |
| Minimum power(HP) | 80 HP | 90 HP | 110 HP | 140 HP | 160 HP |
| Biggest power(HP) | 110 HP | 125 HP | 160 HP | 210 HP | 250 HP |
| Overall dimension(mm) | 2100*1500*1240 | 2600*1500*1240 | 3100*1500*1240 | 3600*1500*1240 | 4100*1500*1240 |
| Linkage | Three-point suspension II type& III type | Three-point suspension II type& III type | |||
1BQ series Heavy duty power driven harrow pictures show
1BZD series hydraulic folding heavy duty disc harrow product parameters
| Model | 1BZD-6.5 | 1BZD-7.5 | 1BZD-8.5 | 1BZD-9.0 | 1BZD-9.5 |
| Diameter of disc(mm) | 660 | 660 | 660 | 660 | 660 |
| Weight (kg) | 7000 | 7200 | 7500 | 7650 | 8300 |
| Working width (mm) | 6500 | 7500 | 8500 | 9000 | 9500 |
| Working depth (mm) | 180-220 | 180-220 | 180-220 | 180-220 | 180-220 |
| Nos of disc blade | 64 | 72 | 80 | 84 | 88 |
| Matched power (hp) | 300 | 350 | 400 | 400 | 500 |
1BZ series hydraulic heavy disc harrow product parameters
| Model | 1BZ-2.2 | 1BZ-2.5 | 1BZ-3.0 | 1BZ-3.4 | 1BZ-4.0 | 1BZ-5.3 |
| Overall dimension(mm) | 4820*2440*1340 | 5320*2880*1340 | 5320*3320*1340 | 5820*3760*1340 | 5820*4320*1340 | 6000*5500*1450 |
| Working width(mm) | 2200 | 2500 | 3000 | 3400 | 4000 | 5300 |
| Working depth(mm) | 180-200 | |||||
| No of disc(pc) | 20 | 24 | 28 | 32 | 36 | 48 |
| Dia.of disc(mm) | 660*6 | 660*6 | 660*6 | 660*6 | 660*6 | 660*6 |
| Productivity(ha/h) | 1.3 | 1.4 | 1.7 | 1.9 | 2.4 | 3-5 |
| Matched power(hp) | 80-100 | 100-120 | 100-120 | 120-150 | 130-150 | 150-200 |
| Linkage | Traction | Traction | Traction | Traction | Traction | Traction |
1BZF series hydraulic folding heavy duty disc harrow product parameters
| Model | 1BZF-5.3 | |
| Diameter of disc(mm) | 660 | |
| Weight (kg) | 5500 | |
| Working width (mm) | 5300 | |
| Working depth (mm) | 180-220 | |
| Nos of disc blade | 48 | |
| Matched power (hp) | 200-300 | |
1BZT series hydraulic heavy disc harrow product parameters
| Model | 1BZT-6.0 |
| Diameter of disc(mm) | 910 |
| Weight (kg) | 11000 |
| Working width (mm) | 6000 |
| Working depth (mm) | 300-350 |
| Maximum working angle | 23 |
| Nos of disc blade | 40 |
| Matched power (hp) | 300-400 |
1BQD series hydraulic pressure contraposion folding light harrow product parameters
| Model | 1BQD-7.2 |
| Diameter of disc(mm) | 460 |
| Weight (kg) | 2920 |
| Working width (mm) | 7200 |
| Working depth (mm) | 100-150 |
| Nos of disc blade | 84 |
| Matched power (hp) | 120-150 |
1BJX series hanging medium-sized disc harrow product parameters
| Model | 1BJX-1.1 | 1BJX-1.3 | 1BJX-1.5 | 1BJX-1.7 | 1BJX-2.0 | 1BJX-2.2 | 1BJX-2.4 | 1BJX-2.5 | 1BJX-2.8 | 1BJX-3.0 | 1BJX-3.4 |
| Working width(mm) | 1100 | 1300 | 1500 | 1700 | 2000 | 2200 | 2400 | 2500 | 2800 | 3000 | 3400 |
| Working depth (mm) | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 |
| No. of disc (pc) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 32 |
| Dia. Of disc (mm) | 560 | 560 | 560 | 560 | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Weight(kg) | 320 | 340 | 360 | 420 | 440 | 463 | 604 | 660 | 700 | 1300 | 1400 |
| Linkage | Three-point suspension | ||||||||||
| Matched power (hp) | 25-30 | 30-40 | 40 | 45 | 50-60 | 55-60 | 65-70 | 75 | 80 | 80 | 100 |
1BQX series hanging light duty disc harrow product parameters
| Model | 1BQX-1.1 | 1BQX-1.3 | 1BQX-1.5 | 1BQX-1.7 | 1BQX-2.0 | 1BQX-2.2 | 1BQX-2.3 | 1BQX-3.4 | 1BQX-5.0 |
| Working width(mm) | 1100 | 1300 | 1500 | 1700 | 2000 | 2200 | 2300 | 3400 | 5000 |
| Working depth (mm) | 100-140 | 100-140 | 100-140 | 100-140 | 100-140 | 100-140 | 100-140 | 100-140 | 100-140 |
| No. of disc (pc) | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 42 | 60 |
| Dia. Of disc (mm) | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 |
| Weight(kg) | 200 | 220 | 250 | 270 | 380 | 400 | 420 | 1150 | 1550 |
| Linkage | Three-point suspension | Tractor traction | |||||||
| Matched power (hp) | 12–18 | 15-18 | 20-25 | 25-30 | 35-40 | 40-45 | 55 | 80-100 | 120 |
1BQDX series hanging pair setting light duty disc harrow product parameters
| Model | 1BQDX-1.25 | 1BQDX-1.6 | 1BQDX-2.0 | 1BQDX-2.3 | 1BQDX-2.65 | 1BQDX-3.0 |
| Working width(mm) | 1250 | 1600 | 2000 | 2300 | 2650 | 3000 |
| Working depth (mm) | 50-150 | 50-150 | 50-150 | 50-150 | 50-150 | 50-150 |
| No. of disc (pc) | 16 | 20 | 24 | 28 | 32 | 36 |
| Dia. Of disc (mm) | 460 | 460 | 460 | 460 | 460 | 460 |
| Weight(kg) | 330 | 390 | 460 | 560 | 600 | 650 |
| Linkage | Three-point suspension | |||||
| Matched power (hp) | 35-40 | 40-45 | 50-60 | 55-70 | 60-80 | 80-90 |
Full range of disc harrow picture display
Full series of share plow, turnover plow, disc plow picture combination display
ES series disc blade Product parameters
| Diameter | Thickness | Weight Plain | Weight Notched | ||||
| MM | INCH | MM | INCH | KG | LBS | KG | LBS |
| 300mm | 12″ | 3 | 1/8″ | 1.6 | 3.5 | 1.1 | 2.4 |
| 330mm | 13″ | 3 | 1/8″ | 1.8 | 4 | 1.2 | 2.6 |
| 360mm | 14″ | 3 | 1/8″ | 2.3 | 4.9 | 1.9 | 4.1 |
| 410mm | 16″ | 3 | 1/8″ | 3.2 | 7 | 2.7 | 5.9 |
| 460mm | 18″ | 3 | 1/8″ | 4.3 | 9.5 | 3.8 | 8.4 |
| 460mm | 18″ | 3.5 | 1/7″ | 4.6 | 10.2 | 4.1 | 9 |
| 510mm | 20″ | 3.5 | 1/7″ | 5.8 | 12.7 | 5.6 | 11.5 |
| 510mm | 20″ | 4 | 2/13″ | 6.5 | 14.4 | 5.8 | 12.7 |
| 560mm | 22″ | 4 | 2/13″ | 8.1 | 18 | 7.5 | 16.5 |
| 560mm | 22″ | 4.5 | 2/11″ | 9 | 20 | 8.5 | 18.7 |
| 560mm | 22″ | 5 | 1/5″ | 9.5 | 21.6 | 9 | 19.8 |
| 560mm | 22″ | 6 | 15/64″ | 12 | 26.5 | 11 | 24.2 |
| 610mm | 24″ | 5 | 1/5″ | 11.3 | 25 | 10.5 | 23.1 |
| 610mm | 24″ | 6 | 15/64″ | 14.2 | 31.5 | 13 | 28.6 |
| 660mm | 26″ | 5 | 1/5″ | 14.1 | 31 | 13 | 28.6 |
| 660mm | 26″ | 6 | 15/64″ | 17 | 37.5 | 15.8 | 34.8 |
| 660mm | 26″ | 7 | 9/32″ | 20 | 43.5 | 18.5 | 40.7 |
| 660mm | 26″ | 8 | 5/16″ | 23 | 51 | 21 | 46 |
| 710mm | 28″ | 6 | 15/64″ | 20 | 44 | 18.5 | 40.7 |
| 710mm | 28″ | 7 | 9/32″ | 23 | 50.6 | 21.5 | 46 |
| 710mm | 28″ | 8 | 5/16″ | 26 | 57.2 | 24 | 52.1 |
| 760mm | 30″ | 8 | 5/16″ | 29 | 64 | 28 | 61.5 |
| 760mm | 30″ | 10 | 3/8″ | 35 | 77 | 33.5 | 73.7 |
| 810mm | 32″ | 8 | 5/16″ | 35 | 77 | 33 | 75 |
| 810mm | 32″ | 10 | 3/8″ | 43 | 95 | 40 | 68 |
| 910mm | 36″ | 12 | 1/2″ | 68 | 150 | 60 | 132 |
| 960mm | 38″ | 12 | 1/2″ | 77 | 170 | 70 | 154 |
| 1016mm | 40″ | 12 | 1/2″ | 82 | 180 | 77 | 169.4 |
| 1116mm | 44″ | 12 | 1/2″ | 89 | 196 | 84 | 184.8 |
Disc blade picture display
Farm tools packaging and shipping site display
Full range of tractor products display
Our company produces other agricultural machinery display
Factory introduction
ZheJiang Euro Star Machinery Manufacture Co., Ltd. is a professional Machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. The company’s products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional machinery equipment manufacturer in China, the company has committed itself to provide all-round solution to global modern agricultural mechanization. The company has integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of CZPT in the world step by step.
The company has passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole.
Supported by comprehensive quality assurance system and developed sales and service network, the company has made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, Most of the company’s products have passed the European CE certification.products are exported to Europe, America, Latin America, the Middle East, Asia-Pacific, CIS, Africa and more than 80 countries and regions.Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Xihu (West Lake) Dis.g at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, the company will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.
Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.
1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified
2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.
3) Training Service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-1 special assignment training;
Remote online network training;
4) Technical Support
The whole process Technology support covers on sale and after-sale service.
Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB HangZhou and CIF your destination for your choice
3). Payment terms for first order:
—–T/T 30% deposit and balance before shipment
—–100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business
FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar’ s warm reception, trustworthy and efficient professional services and persistent care.
How Shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and CZPT service.
Contact us
Mr. Duke Zhang
ZheJiang Euro Star Machinery Manufacture Co., Ltd.
Add: 198 HangZhou Street, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province,P.R.C.
Web:eurostartractor
EUROSTAR CUSTOMERS ALL OVER THE WORLD
| After-sales Service: | 1 Year |
|---|---|
| Type: | Tractor Power Drives Rake |
| Application Field: | Agriculture, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Tractor |
| Operation: | Soil Preparation Machinery, Continuous Running Operation |
| Customization: |
Available
| Customized Request |
|---|
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by CX 2023-05-16
in Cebu City Philippines sales price shop near me near me shop factory supplier Best Selling R Series Helical Gearbox Without IEC Motor manufacturer best Cost Custom Cheap wholesaler
“We are usually serving our consumers with our ideal merchandise.” Retaining in thoughts that very good services is the crucial to cooperating with customers, we attempt to satisfy large high quality specifications, offer competitive rates and make sure prompt delivery. Our solution selection consists of all varieties of helical gear, spur gear, bevel gear, gear rack, worm equipment, sprockets,chains, bearings. Ideal Selling R Sequence Helical EPT With out IEC EPT
| EPT material | EPT200 higher-power cast iron from R37,47,57,sixty seven,77,87 |
| EPT material | EPT250 High energy cast iron from R97 107,137,147,157,167 |
| EPT hardness | HBS90-240 |
| Equipment substance: | 20CrMnTi |
| Floor hardnesss of EPT | HRC58 deg-62 deg |
| Equipment core hardness | HRC33 deg-forty deg |
| Enter/Output shaft materials | 40Cr |
| Enter/Output shaft hardness | HBS241 deg-286 deg |
| Shaft at oil seal postion hardness | HRC48 deg -55 deg |
| Machining precision of EPTs materials | Correct grinding six-5 quality |
| Warmth treatment method | tempering, cementing, quenching and so forth |
| Efficiency | In excess of ninety% |
| Sound(Max) | sixty-68dB |
| Unit design | Foot mounted,flange mounted |
| Input strategy | flange input,inline input,shaft input |
| Vibration | le20um |
| Backlash | le20Arcmin |
| EPT makes | NSK,C ampU and so on |
| Oil seal brand names | NAK,SKF and so on |
| Lubricant | VG220 |
| EPT | IP55, F class |
| EPT shaft | 40Cr, Tempering, cementing,quenching and so forth. |
one.Our Solutions
one.1.We offer twelve months Warranty.
one.2. We have 1000’s of EPT EPTs. From Input EPT .06KW to 200KW, Ratio 1.three-289.seventy four, Output velocity -1095rpm and Output torque one.four-62800Nm. They can meet up with your all different specifications for distinct EPT.
one.three. We give E-catalog or Paper catalog,so you can select the model effortlessly according to your specifications
one.4.You are welcome to check out our factory to examine our products,we can aid you to book the hotel or ticket
2.Business Info
two.1.Our Organization:
The Predecessor for ZheJiang EPT Push CO.,Ltd (initially called HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO.,Ltd) Point out-owned army mould EPTrpriese which estabEPTd in 1965.
EPT is positioned in HangEPT,EPT and the manufacturing unit covers an area of about 25000 square meters.
Production Capability:a lot more than fifty percent a million sets of velocity EPT for each year.
two.2.Our Individuals:
The company has a robust specialized drive. It has much more than 400 employees at current, incXiHu (West Lake) Dis.Hu (West Lake) Dis. much more than forty engineering technicians and 10 professionals and senior engineers enEPTing EPT allowances of the Point out Council.
two.three. Our Certificates:
Handed quot ISO 9001 Intercontinental EPT Technique Certification quot, quotInternational EPT Credit history AAA Ceritifacte quot , quot Swiss SGS Certification quot, Legendary Manufacturer in EPT EPT Business quot, quotFamous Brand name of ZheJiang Province quot, quotNon-public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational High and EPT-tech EPTrprise quot, quotTOP fifty in EPT Equipment Market quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on.
three. FAQ
Q:Are you a trading business or manufacturer?
A: HangEPT EPT Drive Co., Ltd previously was a State-owned XiHu (West Lake) Dis.ngguang Mould Manufacturing facility, a condition-owned navy EPT EPTrprise estabEPTd in 1965. It accomplished reform in 2002. Given that reform, EPT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed swiftly. It took the guide in passing ISO9001 Intercontinental EPT Technique Certification and Global EPT Credit score AAA Certificate in 2004, and Swiss SGS Certification in 2009. It has gained this sort of titles as quotIconic Model in EPT EPT Market quot, quotFamous Brand name of ZheJiang Province quot, quotNon-public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Large and EPT-tech EPTrprise quot, and quotTope fifty in EPT Equipment Sector quot successively
Q:Exactly where do you foundation?
A: We are in HangEPT,ZheJiang ,EPT. We have two factories,EPT factory is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPT,EPT and the outdated one is in CHangEPT District,HangEPT,EPT.
Q:What varieties of EPT can you generate for us?
A:Main goods of our organization: JWB-X sequence mechanical continuously variable EPT, RV series worm EPT EPT, B/JXJ cycloidal pin EPT speed EPT, NCJ collection EPT EPT, and R, F K, S collection helical-tooth EPT, more than one hundred types and 1000’s of requirements.
Q:What are the software of the EPT?
A:EPT are extensively utilized in ceramic, EPT, food, metallurgy, beer amp drink, printing and dyeing, textile, petrochemical engineering, warehouse EPT, wood-operating EPT, environmental security products, printing and EPT, pharmacy, and leather-based. EPT are bought in some countries and locations, this sort of as Europe, The usa, and SouthEPT Asia, and it possesses dozens of distributors and right after-sale services agents.
Q:What is the substance you use?
A1: EPT EPT body ( For the RV series worm EPT Dimensions 30~90)
A2: Cast iron(For the RV series worm EPT, Size one hundred ten-150, For the NCJ amp F/R/S/K collection helical EPT EPT)
Our manufacturing facility (ZheJiang EPT Generate Co., Ltd.) is a big and renowned 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT manufacturing facility with all around 380 staff given that 1965 . We export to South Asia, SouthEPT Asia, Africa, Middle EPT, South America, North The us, Europe…and so on. We offer you EPT to SIEMENS,ABB,SACMI,BUHLER,MODENA,EPT…and so on. Sincerely hope to establish a get-win business relationship with you.
Expecting to talk about a lot more details with you !
Ideal Needs
Any inquiry pls make contact with:
Nicola EPTng (Export product sales)
Web site:
in Kermanshah Iran (Islamic Republic of) sales price shop near me near me shop factory supplier 703 705 706 707 709 710 Bonfiglioli Final Drive Planetary Gearbox manufacturer best Cost Custom Cheap wholesaler
a specialized supplier of a complete selection of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers. Ever-Electrical power Team CO., LTD. IS Specialist IN Creating ALL Varieties OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Gear Speed REDUCERS, PARALLEL SHAFT HELICAL Equipment REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Vehicle GEARBOXES, PTO Generate SHAFTS, Particular REDUCER & Related Gear Elements AND OTHER Connected Goods, SPROCKETS, HYDRAULIC Technique, VACCUM PUMPS, FLUID COUPLING, Gear RACKS, CHAINS, TIMING PULLEYS, UDL Velocity VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Minimal BACKLASH WORM REDUCERS AND SO ON. we are self-assured to provide our customers flexible and diversified solutions.
F40 F55 F80 F100 F130 F180 F220 F260 F280 F340 F360 F420 F440 F560 601 603 605 607 609 610 611 613 615, and seven-hundred 701 703 705 706 707 709 710 711 713 715 716 717 journey EPT closing EPT Planetary O ampK EPT Bonfiglioli Drives and EPT for Building EPT purposes When it arrives to EPT modular EPTtrain elements, O ampK EPT is acknowledged to be foremost. Many years of encounter in engineering sophisticated EPTs amp EPTes have benefited a broad assortment of customers.
Nowadays O ampKA is one particular of the entire world acutes foremost producers of planetary EPTs.
As a competence centre inside of the Carraro Group, EPT deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s ultimate EPTs, slew EPTs, cutter EPTs for cellular programs as properly as EPTs for wind generators, walkwaEPTand escalators.
Ever shrinking dimensions allow the models to be put in anywhere room is of the essence. The large array of stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd reductions and add-on EPT motors enables O ampK EPT to give personal solution configurations, whilst outstanding fleXiHu (West Lake) Dis.bility enables client wishes to be achieved in a extremely short time.
This is the end result of an oustXiHu (West Lake) Dis.Hu (West Lake) Dis. amp deep knowlegde in terms of EPT amp DeveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment. O ampKA implies top quality amp EPT from Germany.
Specifics reXiHu (West Lake) Dis.Hu (West Lake) Dis.ding the selection of EPT fluid:
The right option of EPT fluid calls for expertise of the functioning temperature in relation to the ambient temperature: in a shut circuit the circuit temperature. The EPT fluid need to be decided on so that the functioning viscosity in the working temperature variety is inside the ideal range – the shaded region of the choice diagram. We suggested that the larger viscosity course be chosen in every single scenario. Illustration: At an ambient temperature of X degC an running temperature of fifty eight degC is set. In the ideal functioning viscosity assortment (shaded region) this corresponds to the viscosity courses VG46 or VG66 to be chosen: VG66. You should be aware: The scenario drain temperature, which is impacted by stress and velocity, is alwaEPThigher than the circuit temperature. At no stage in the technique may possibly the temperature be increased than one hundred ten degC. If the above conditions are not able to be preserved thanks to extreme functioning parameters, remember to seek advice from us.
in Nice France sales price shop near me near me shop factory supplier cyclo gearbox for power transmission manufacturer best Cost Custom Cheap wholesaler
We have exported our items to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, and so on. we offer chromed bar and tubes for hydualic and pheumatic cylinders. a specialized provider of a entire variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers. EPT data:
one. Frame: Solitary phase 1, two, three, four, 5, 6, 7, 8, 9, 10, 11
EPT stage 31, forty two, 53, sixty three, 74, eighty five, 95, 106, 116, 117
two. Ratio range: Solitary stage nine, eleven, seventeen, 23, 29, 35, forty three, 59, seventy one, 87
EPT stage121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849
3. Input EPT: .twelve-fifty five KW
4. Permit torque rang: 70-20000 N. M
five. Framework: Foot-mounted amp flange-mounted
Attribute:
Several tooth EPT, higher energy and higher believability
The material of major areas is bearing metal
Minor inertia adapts EPT for EPT and reverse operation
Minimal sound large effectiveness, one stage efficiency are far more than ninety two%
Enter and output shaft in the same aXiHu (West Lake) Dis.s, little volume