Product Description
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Product Description
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CHINAMFG the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.What’re your main products?
we currently product Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gear pump and motor.You can check the specifications for above product on our website and you can email us to recommend needed product per your specification too.
2.What’s your warranty terms?
One year.
3.What’s the lead time for a regular order?
Generally speaking, our regular standard product will need 30-45days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
4.What’s the payment term?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
5.Can you send me a price list?
For all of our product, they are customized based on different requirements like length, ratio,voltage,and power etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.
6.How to deliver the goods to us?
Usually we will ship the goods to you by sea.
Other Products
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural Spare Part, Agricultural Spare Part |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor, Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery, Farm Tractor |
| Material: | Carbon Steel, 45cr Steel, Carbon Steel |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do manufacturers ensure the compatibility of PTO drivelines with diverse equipment?
Manufacturers employ various methods and considerations to ensure the compatibility of PTO (Power Take-Off) drivelines with diverse equipment. Here are the key factors they take into account:
1. Standardization:
– PTO drivelines are built according to standardized specifications and dimensions. Manufacturers adhere to industry standards and guidelines, such as those set by organizations like the American Society of Agricultural and Biological Engineers (ASABE) and the International Organization for Standardization (ISO). These standards define key parameters like shaft dimensions, connection types, torque ratings, and safety requirements. By following these standards, manufacturers ensure that their PTO drivelines can be easily interchanged and connected with diverse equipment that adheres to the same standards.
2. Compatibility Testing:
– Manufacturers conduct extensive compatibility testing to verify the performance and suitability of their PTO drivelines with different types of equipment. This testing involves connecting the drivelines to various implements, machines, and power sources to assess factors like power transfer efficiency, alignment, torque handling, and safety. Compatibility testing helps identify any issues or limitations that may arise when connecting the drivelines to different equipment. Manufacturers can then make necessary adjustments or recommendations to ensure optimal compatibility.
3. Application-Specific Design:
– Manufacturers often design PTO drivelines with specific applications in mind. They consider the requirements and operating conditions of various equipment categories, such as agricultural machinery, construction equipment, or industrial machinery. Manufacturers may offer different models or configurations of PTO drivelines tailored to these specific applications. For example, agricultural PTO drivelines may have features like enhanced dust resistance, rugged construction, and additional safety measures, while industrial PTO drivelines may prioritize high torque capacity and durability for heavy-duty applications. By designing drivelines with application-specific considerations, manufacturers ensure that their products meet the unique demands of diverse equipment types.
4. Consultation and Collaboration:
– Manufacturers maintain close relationships and collaborations with equipment manufacturers and suppliers. This collaboration allows them to exchange information about equipment requirements and driveline specifications. By understanding the specific needs of different equipment, manufacturers can develop PTO drivelines that align with those requirements. They may also provide technical support and guidance to equipment manufacturers regarding the selection and integration of PTO drivelines into their products. This consultation and collaboration foster compatibility and ensure that the drivelines are suitable for the intended equipment.
5. Documentation and Guidelines:
– Manufacturers provide detailed documentation, user manuals, and guidelines that outline the compatibility aspects of their PTO drivelines. These resources specify the recommended equipment types, connection methods, torque limits, and other important considerations for proper integration. Operators and equipment manufacturers can refer to these documents to ensure the compatibility of the PTO drivelines with diverse equipment. Manufacturers may also offer technical support or customer service channels to address any compatibility-related questions or concerns.
6. Ongoing Research and Development:
– Manufacturers continuously invest in research and development to improve the compatibility of their PTO drivelines with evolving equipment technologies. They stay updated with industry trends, technological advancements, and changing equipment requirements. This allows them to adapt and innovate their driveline designs, materials, and manufacturing processes to ensure ongoing compatibility with new and emerging equipment types and applications.
In summary, manufacturers ensure the compatibility of PTO drivelines with diverse equipment through standardization, compatibility testing, application-specific design, consultation and collaboration with equipment manufacturers, documentation and guidelines, and ongoing research and development. These efforts enable manufacturers to provide drivelines that effectively and safely interface with a wide range of equipment, promoting seamless integration and reliable power transfer.
How do PTO drivelines contribute to the efficiency of various agricultural tasks?
PTO (Power Take-Off) drivelines play a crucial role in improving the efficiency of various agricultural tasks by providing a reliable and versatile power source for agricultural machinery. Here are several ways in which PTO drivelines contribute to the efficiency of agricultural tasks:
1. Power Transfer:
– PTO drivelines enable the transfer of power from a tractor or other power source to agricultural implements and machinery. This allows the machinery to perform tasks that require power, such as operating rotary cutters, hay balers, augers, grain conveyors, and other equipment used in farming operations. By providing a direct power connection, PTO drivelines eliminate the need for separate engines or motors on individual machines, streamlining the overall operation and reducing costs.
2. Versatility:
– PTO drivelines offer versatility by allowing the same power source, such as a tractor, to drive a wide range of agricultural implements and machinery. Farmers can easily switch between different attachments and equipment without the need for additional power sources. This flexibility increases operational efficiency, as a single power unit can be used for multiple tasks, reducing the time and effort required to switch between equipment.
3. Time Savings:
– PTO drivelines contribute to time savings in agricultural tasks. By providing a direct power connection, PTO drivelines eliminate the need for manual labor or slower methods of power transmission. This results in faster and more efficient operation of machinery, allowing farmers to accomplish tasks more quickly. For example, using a PTO-driven hay baler can significantly speed up the baling process compared to manual or horse-drawn methods, increasing overall productivity.
4. Labor Efficiency:
– PTO drivelines reduce the reliance on manual labor in agricultural tasks. By utilizing machinery powered by PTO drivelines, farmers can accomplish tasks with fewer workers. This labor efficiency helps optimize resources and reduces the costs associated with hiring and managing a larger workforce. Additionally, PTO-driven machinery often requires less physical effort to operate, reducing operator fatigue and improving overall productivity.
5. Increased Capacity and Output:
– PTO drivelines enable agricultural machinery to handle larger capacities and increase output. Machinery equipped with PTO drivelines can handle larger volumes of crops, process materials more efficiently, and cover larger areas in a shorter time. For example, PTO-driven seed drills can sow seeds over a wide area, increasing planting capacity and allowing farmers to cover more ground in less time.
6. Consistent Power:
– PTO drivelines provide a consistent power supply to agricultural machinery, ensuring optimal performance and efficiency. The power from the tractor or power source is transmitted directly to the machinery, maintaining a steady and reliable power input. Consistent power delivery contributes to consistent and uniform operation of the equipment, resulting in better quality outputs and reducing the need for rework or adjustments.
7. Improved Precision and Accuracy:
– PTO drivelines enable agricultural machinery to operate with greater precision and accuracy. Machinery equipped with PTO drivelines can incorporate advanced technology and features such as GPS guidance systems, automatic controls, and variable-rate application capabilities. These features allow for precise and targeted operations, such as accurate seed placement, precise fertilizer application, and controlled spraying. Improved precision and accuracy result in optimized resource utilization, reduced waste, and enhanced crop quality.
8. Reduced Maintenance and Equipment Costs:
– PTO drivelines can contribute to reduced maintenance and equipment costs. Since PTO-driven machinery relies on a single power source, such as a tractor, there are fewer engines or motors to maintain and service. This simplifies maintenance requirements and reduces costs associated with maintaining multiple power units. Additionally, PTO-driven machinery often has fewer complex components compared to self-powered machines, resulting in lower equipment costs and easier maintenance.
Overall, PTO drivelines significantly enhance the efficiency of various agricultural tasks by providing a reliable power source, offering versatility in equipment usage, saving time, improving labor efficiency, increasing capacity and output, delivering consistent power, enabling precision operations, and reducing maintenance and equipment costs. These advantages contribute to increased productivity, improved resource utilization, and enhanced profitability in agricultural operations.
What benefits do PTO drivelines offer for tasks like tilling, mowing, and harvesting?
PTO (Power Take-Off) drivelines offer several benefits for tasks like tilling, mowing, and harvesting in agricultural operations. These benefits contribute to increased efficiency, improved productivity, and enhanced performance in these specific tasks. Let’s explore the advantages that PTO drivelines provide for each of these tasks:
Tilling:
1. Powerful and Efficient Operation: PTO drivelines enable tilling equipment, such as rotary tillers or disc harrows, to efficiently break up and prepare the soil for planting. The rotational power transmitted through the PTO shaft provides the necessary force for the tines or blades of the tiller to penetrate the soil, ensuring thorough tillage and soil preparation.
2. Uniform and Consistent Tilling: PTO-driven tillers offer consistent and uniform tilling depth and quality throughout the field. The power generated by the power source is evenly distributed through the PTO driveline, resulting in uniform tilling across the entire working width of the implement. This helps create an optimal seedbed for planting, promoting seed germination and crop growth.
3. Versatility and Adjustability: PTO drivelines allow for the use of different types and sizes of tillage implements, providing flexibility and adaptability to varying soil conditions and farming practices. Operators can easily attach and detach different tillage equipment to the PTO shaft, enabling them to switch between implements based on the specific requirements of the soil and crops.
Mowing:
1. Efficient Cutting: PTO-driven mowers, whether rotary or flail mowers, provide efficient cutting performance. The high rotational speed and power transmitted through the PTO driveline enable the mower blades to effectively cut through grass, weeds, or crops, resulting in a well-maintained and visually appealing appearance of the mowed area.
2. Wide Coverage and Reduced Time: PTO-driven mowers typically have wide cutting widths, allowing operators to cover a larger area in less time. This reduces the overall mowing time, increasing efficiency and productivity. The power transmitted through the PTO driveline facilitates the swift operation of the mower, ensuring efficient cutting even in dense vegetation.
3. Adjustable Cutting Height: PTO drivelines allow for easy adjustment of the cutting height of the mower. Operators can modify the height of the mower deck or attachment, ensuring precise cutting based on the desired aesthetic or functional requirements. This flexibility in cutting height adjustment enhances the versatility of PTO-driven mowers for various applications, such as maintaining lawns, meadows, or pastures.
Harvesting:
1. Powerful Harvesting: PTO drivelines provide the necessary power to operate harvesting equipment, such as combines, forage harvesters, or balers. The high torque and rotational power transmitted through the PTO shaft enable efficient harvesting of crops, ensuring smooth operation and reduced crop loss during the process.
2. Improved Harvesting Capacity: PTO-driven harvesting equipment often features wider headers or cutting widths, allowing for increased harvesting capacity. The power transferred through the PTO driveline enables the equipment to cover a larger area, improving overall harvesting efficiency and reducing the time required to complete the task.
3. Integration with Other Equipment: PTO drivelines facilitate the integration of various harvesting equipment with other implements or attachments. For example, a PTO-driven combine harvester can be equipped with a straw chopper or a grain cart, which can be powered by the same PTO driveline. This integration enhances the efficiency of the overall harvesting process and simplifies the logistics of crop collection and storage.
In summary, PTO drivelines offer several benefits for tasks like tilling, mowing, and harvesting. They provide powerful and efficient operation, uniform and consistent performance, versatility and adjustability, wide coverage and reduced time, adjustable cutting height, and increased harvesting capacity. These advantages contribute to improved efficiency, productivity, and performance in agricultural operations, helping farmers achieve optimal results in these critical tasks.
editor by CX 2024-05-09
China Hot selling Harvester Farm Harrow Tractor Pto Drive Shaft and Power Tiller Cardan Shaft for Agricultural Machinery Spare Parts PTO Driveline
Product Description
Harvester Farm Harrow Tractor Pto Drive Shaft and Power Tiller Cardan Shaft for Agricultural Machinery Spare Parts
Product Description
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.What’re your main products?
we currently product Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gear pump and motor.You can check the specifications for above product on our website and you can email us to recommend needed product per your specification too.
2.What’s the lead time for a regular order?
Generally speaking, our regular standard product will need 30-45days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
3.What’s your warranty terms?
One year.
4.Can you send me a price list?
For all of our product, they are customized based on different requirements like length, ratio,voltage,and power etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.
5.What’s the payment term?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
6.How to deliver the goods to us?
Usually we will ship the goods to you by sea.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural Spare Part, Agricultural Spare Part |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor, Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery, Farm Tractor |
| Material: | Carbon Steel, 45cr Steel, Carbon Steel |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What maintenance practices are crucial for extending the lifespan of PTO driveline components?
Proper maintenance is essential for extending the lifespan of PTO (Power Take-Off) driveline components and ensuring their optimal performance. By following these crucial maintenance practices, you can minimize wear and tear, prevent premature failures, and maximize the longevity of your PTO driveline:
1. Regular Inspection:
– Conduct regular visual inspections of the entire PTO driveline assembly. Look for signs of damage, wear, or loose components. Pay close attention to the driveline shaft, universal joints, bearings, and couplings. Detecting early signs of wear or damage allows for timely repairs or replacements, preventing further damage and ensuring the longevity of the driveline components.
2. Lubrication:
– Proper lubrication is crucial for the smooth operation and longevity of PTO driveline components. Follow the manufacturer’s recommendations for lubricating the driveline, including the type of lubricant and the recommended intervals. Ensure that all lubrication points, such as universal joints and bearings, receive adequate grease or oil. Regular lubrication minimizes friction, reduces wear, and helps maintain the driveline’s efficiency and reliability.
3. Tightening and Fastener Checks:
– Periodically check and tighten all fasteners, such as bolts, nuts, and set screws, within the PTO driveline assembly. Vibrations and continuous operation can cause these fasteners to loosen over time, potentially leading to misalignment or damage. Regularly inspecting and tightening the fasteners ensures that the driveline remains securely connected, reducing the risk of component failure or disengagement during operation.
4. Balance and Alignment:
– Proper balance and alignment of the PTO driveline components are crucial for reducing vibrations, minimizing stress, and extending component life. Inspect and correct any imbalances or misalignments in the driveline components, including the driveline shaft and universal joints. Imbalances or misalignments can cause excessive wear on bearings, joints, and other driveline parts. Addressing these issues through proper balancing and alignment ensures smoother operation and prolongs the lifespan of the driveline.
5. Protection from Contaminants:
– Protecting the PTO driveline components from contaminants, such as dirt, debris, and moisture, is essential for preventing corrosion, premature wear, and damage. Clean the driveline regularly, removing any accumulated dirt or debris. Consider using protective covers or shields to minimize exposure to moisture and other environmental elements. Additionally, store the driveline in a clean and dry environment when not in use. Keeping the driveline components clean and protected helps maintain their performance and extends their lifespan.
6. Proper Usage and Handling:
– Follow the recommended usage guidelines provided by the manufacturer to ensure the driveline components are not subjected to excessive loads, speeds, or angles beyond their design capabilities. Avoid overloading the driveline or using it with incompatible equipment. Properly engage and disengage the PTO driveline according to the manufacturer’s instructions to prevent abrupt shocks or excessive wear. Handling the driveline with care and following proper usage practices reduces stress on the components and contributes to their longevity.
7. Prompt Repairs:
– Address any signs of damage, wear, or malfunction promptly. If you notice unusual vibrations, noise, or any other abnormal behavior during operation, investigate and address the issue as soon as possible. Delaying repairs or ignoring potential problems can lead to further damage and more extensive repairs down the line. Timely repairs help prevent component failures and extend the overall lifespan of the PTO driveline.
8. Professional Maintenance:
– For more complex maintenance tasks or when in doubt, consider seeking professional assistance. Experienced technicians or authorized service centers can provide thorough inspections, perform specialized maintenance procedures, and offer expert advice on maintaining the PTO driveline components. Professional maintenance ensures that the driveline receives the necessary care and attention to maximize its lifespan and performance.
By implementing these crucial maintenance practices, you can significantly extend the lifespan of PTO driveline components. Regular inspections, proper lubrication, tightening and fastener checks, balance and alignment, protection from contaminants, proper usage and handling, prompt repairs, and seeking professional maintenance when needed are key to preserving the driveline’s longevity and optimizing its performance.
Can PTO drivelines be customized for specific machinery and power requirements?
Yes, PTO (Power Take-Off) drivelines can be customized to meet the specific machinery and power requirements of different applications. Manufacturers often offer customization options to ensure optimal integration and performance. Here are the key aspects of customization for PTO drivelines:
1. Length and Sizing:
– PTO drivelines can be customized in terms of length and sizing to fit specific machinery and equipment. Different machines may have varying distances between the power source and the driven component, requiring a specific length of the driveline. Manufacturers can create drivelines with custom lengths or provide adjustable telescopic designs to accommodate different equipment configurations. Additionally, the diameter and torque capacity of the driveline can be tailored to match the power requirements of the machinery.
2. Connection Types:
– PTO drivelines can be customized to include specific connection types to match the requirements of the machinery. Different equipment may utilize various connection methods, such as splined shafts, clamping mechanisms, or quick couplers. Manufacturers can design and provide drivelines with compatible connection interfaces to ensure a secure and efficient connection between the power source and the driven equipment. Customization in connection types allows for seamless integration and easy interchangeability.
3. Torque Handling:
– PTO drivelines can be customized to handle specific torque requirements of machinery. Different applications may demand varying levels of torque transmission, depending on the power demands of the driven equipment. Manufacturers can design the driveline components, such as the shafts, universal joints, and yokes, with materials and dimensions that can withstand the required torque levels. Customized torque handling capabilities ensure optimal power transfer and prevent driveline failures or damage.
4. Application-Specific Features:
– PTO drivelines can be customized to include application-specific features based on the machinery requirements. For example, agricultural machinery may require drivelines with enhanced dust protection or sealing to prevent contamination. Construction equipment may need drivelines with additional ruggedness or protection against impact and debris. Manufacturers can incorporate these features into the driveline design to ensure compatibility and durability in specific applications.
5. Safety Considerations:
– Customization of PTO drivelines also takes into account safety considerations specific to the machinery. Depending on the application and industry standards, manufacturers can integrate safety features such as guards, shields, or emergency stop mechanisms to protect operators from potential hazards associated with the driveline components. Customization ensures that the driveline system meets the safety requirements and regulations of the machinery it will be used with.
6. Collaboration with Equipment Manufacturers:
– Manufacturers often collaborate closely with equipment manufacturers to customize PTO drivelines for specific machinery. This collaboration involves sharing information about the machinery’s power requirements, mounting configurations, and other specifications. By working together, manufacturers can tailor the design and characteristics of the PTO driveline to seamlessly integrate with the equipment, ensuring compatibility, performance, and safety.
In summary, PTO drivelines can be customized to meet the specific machinery and power requirements of different applications. Customization options include length and sizing adjustments, compatibility with specific connection types, torque handling capabilities, application-specific features, safety considerations, and collaboration with equipment manufacturers. By offering customization, manufacturers can provide PTO drivelines that are precisely tailored to the needs of the machinery, enabling efficient power transfer and optimal performance.
Which industries and applications commonly utilize PTO drivelines for power distribution?
PTO (Power Take-Off) drivelines are widely used in various industries and applications that require the distribution of rotational power from a power source to driven equipment. The versatility and efficiency of PTO drivelines make them suitable for a range of tasks across different sectors. Let’s explore some of the industries and applications that commonly utilize PTO drivelines:
1. Agriculture:
The agriculture industry extensively relies on PTO drivelines for power distribution. Tractors equipped with PTO drivelines are commonly used to operate a wide array of implements and machinery, such as mowers, balers, harvesters, sprayers, seeders, and spreaders. PTO drivelines enable efficient power transmission for tasks like cutting, baling, spraying, planting, and spreading, contributing to the overall productivity and effectiveness of agricultural operations.
2. Construction and Earthmoving:
In the construction and earthmoving industry, PTO drivelines are utilized in heavy machinery for tasks such as excavating, grading, and material handling. Equipment like backhoes, loaders, and skid-steer loaders may feature PTO drivelines to power attachments like augers, trenchers, and hydraulic hammers. This enables these machines to perform a variety of functions efficiently, enhancing productivity on construction sites.
3. Forestry:
Forestry operations often employ PTO drivelines for power distribution in equipment used for wood processing, chipping, and mulching. Forestry mulchers, wood chippers, and stump grinders are commonly driven by PTO drivelines, allowing them to convert trees and wood waste into manageable sizes or mulch. PTO drivelines provide the necessary power to these machines, enabling efficient and effective forestry operations.
4. Landscaping and Groundskeeping:
The landscaping and groundskeeping industry extensively uses PTO drivelines for power distribution in equipment like lawn mowers, rotary cutters, and turf aerators. PTO-powered mowers can cover large areas efficiently, while rotary cutters are used for clearing brush and rough vegetation. Turf aerators equipped with PTO drivelines help maintain healthy lawns by improving soil aeration. PTO drivelines contribute to the performance and productivity of landscaping and groundskeeping tasks.
5. Utility and Municipal Services:
PTO drivelines find applications in utility and municipal services, where various equipment is used for maintenance and operations. Street sweepers, snow blowers, salt spreaders, and sewer cleaners often rely on PTO drivelines for power distribution. These machines can efficiently perform their respective tasks, such as cleaning streets, removing snow, spreading de-icing material, and maintaining sewer systems.
6. Industrial and Manufacturing:
In the industrial and manufacturing sectors, PTO drivelines are utilized in machinery and equipment for power distribution. Industrial mixers, pumps, generators, and compressors often incorporate PTO drivelines to transfer rotational power efficiently. This enables these machines to perform their specific functions, such as mixing materials, pumping fluids, generating electricity, or compressing air.
These are just a few examples of the industries and applications that commonly utilize PTO drivelines for power distribution. The versatility and efficiency of PTO drivelines make them suitable for a wide range of tasks, enabling power to be harnessed from a power source and efficiently distributed to driven equipment. PTO drivelines significantly contribute to the productivity and functionality of machinery in various sectors, enhancing overall operational efficiency.
editor by CX 2024-05-07
China Standard CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft PTO Driveline
Product Description
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Product Description
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CHINAMFG the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.What’re your main products?
we currently product Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gear pump and motor.You can check the specifications for above product on our website and you can email us to recommend needed product per your specification too.
2.What’s your warranty terms?
One year.
3.What’s the lead time for a regular order?
Generally speaking, our regular standard product will need 30-45days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
4.What’s the payment term?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
5.Can you send me a price list?
For all of our product, they are customized based on different requirements like length, ratio,voltage,and power etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.
6.How to deliver the goods to us?
Usually we will ship the goods to you by sea.
Other Products
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural Spare Part, Agricultural Spare Part |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor, Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery, Farm Tractor |
| Material: | Carbon Steel, 45cr Steel, Carbon Steel |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do PTO drivelines accommodate variations in length and connection methods?
PTO (Power Take-Off) drivelines are designed to accommodate variations in length and connection methods to provide flexibility and compatibility with different equipment and applications. Here’s how PTO drivelines achieve this:
1. Telescoping Design:
– PTO drivelines often feature a telescoping design, allowing for adjustable length. Telescoping drivelines consist of two or more shaft sections that can slide within one another, similar to a telescope. This design enables the driveline to extend or retract to match the required length for connecting the power source (e.g., tractor) to the implement. By adjusting the length, telescoping drivelines can accommodate variations in the distance between the power source and the implement, ensuring a proper fit and efficient power transfer.
2. Splined Connections:
– PTO drivelines commonly use splined connections to ensure secure and reliable power transmission. Splines are ridges or grooves on the driveline shaft and corresponding mating components. They provide a positive engagement and torque transfer between the driving and driven shafts. Splined connections allow for variations in length and also provide some flexibility in alignment. By sliding the shaft sections within the telescoping design, operators can align the splined connections to achieve proper engagement and compensate for small misalignments.
3. Shear Pins and Slip Clutches:
– PTO drivelines incorporate shear pins or slip clutches as safety devices to protect against sudden overloads or obstructions. Shear pins are designed to break when excessive torque is applied to the driveline, preventing damage to the driveline components. Slip clutches, on the other hand, allow for controlled slippage when a certain torque threshold is exceeded. These safety mechanisms not only protect the driveline but also accommodate slight variations in length and sudden changes in load. They provide a degree of flexibility and help prevent driveline damage in case of unexpected stress or resistance.
4. Interchangeable Components:
– PTO drivelines often utilize interchangeable components, such as yokes, couplings, and adapters, to accommodate different connection methods. These components allow for compatibility between the driveline and various implements or equipment. For example, driveline yokes are available in different sizes, styles, and connection types, such as round, square, or hexagonal bores. This interchangeability enables operators to select the appropriate components that match the connection methods used by their specific equipment, ensuring a secure and proper fit.
5. Manufacturer Specifications:
– PTO drivelines are designed and manufactured according to specific standards and guidelines provided by the manufacturers. These specifications outline the maximum and minimum length requirements, connection methods, torque ratings, and other parameters necessary for safe and efficient operation. Operators should refer to the manufacturer’s guidelines and recommendations to ensure that the driveline accommodates any variations in length and connection methods within the specified limits.
6. Customization and Adaptation:
– In some cases, PTO drivelines may require customization or adaptation to accommodate unique length or connection requirements. This can involve modifying the length of the driveline shafts, using different adapters or couplings, or even ordering custom-made driveline assemblies. Consulting with driveline manufacturers, equipment suppliers, or driveline specialists can help determine the best approach for accommodating specific variations in length and connection methods.
In summary, PTO drivelines accommodate variations in length and connection methods through telescoping designs, splined connections, shear pins, slip clutches, interchangeable components, and adherence to manufacturer specifications. These features ensure flexibility, compatibility, and reliable power transfer between the power source and the implement, regardless of the specific length or connection requirements of the equipment or application.
Are there any limitations or challenges associated with using PTO driveline systems?
While PTO (Power Take-Off) driveline systems offer numerous benefits, there are also certain limitations and challenges associated with their use. Here are some of the key considerations:
1. Safety Risks:
– PTO driveline systems can pose safety risks if not handled properly. The rotating components of the driveline, such as the shafts, yokes, and universal joints, can cause serious injuries if operators come into contact with them while in motion. It is crucial to follow proper safety procedures, including the use of shields, guards, and safety devices, to prevent accidents. Adequate training and awareness about the potential hazards associated with PTO driveline systems are essential.
2. Maintenance and Lubrication:
– PTO driveline systems require regular maintenance and lubrication to ensure optimal performance and longevity. The universal joints, splines, and other moving parts need to be inspected, cleaned, and properly lubricated according to the manufacturer’s recommendations. Neglecting maintenance can lead to premature wear, increased friction, and potential failures, compromising the driveline’s efficiency and reliability.
3. Alignment and Misalignment:
– Proper alignment between the power source and the driven equipment is crucial for efficient power transfer in PTO driveline systems. Misalignment can result in increased vibration, excessive wear, and reduced power transmission efficiency. Achieving and maintaining proper alignment can be challenging, especially when connecting the driveline to equipment with varying mounting heights, angles, or misaligned driveline components. Operators need to carefully align the driveline to minimize stress and ensure smooth operation.
4. Length and Compatibility:
– PTO driveline systems need to be appropriately sized and compatible with the specific equipment and applications they are intended for. Variations in length, connection types, and torque requirements among different equipment can pose challenges in selecting the right driveline. Ensuring proper compatibility and fit between the driveline and the equipment is crucial for optimal power transmission and safety. Customization or adaptation may be necessary in certain cases, which could add complexity and cost.
5. Torque Overload and Protection:
– PTO driveline systems are susceptible to torque overload, especially when the driven equipment encounters sudden resistance or obstructions. Excessive torque can lead to driveline component failures, such as universal joint breakage or shear pin failure, potentially causing damage to the driveline or other connected components. Proper protection mechanisms, such as shear pins, slip clutches, or overload clutches, should be employed to prevent damage and ensure operator safety.
6. Noise and Vibration:
– PTO driveline systems can generate significant noise and vibration during operation. The rotating components, imbalances, misalignments, or worn-out components can contribute to increased noise levels and vibration. Excessive noise and vibration not only affect operator comfort but can also lead to component fatigue and premature wear. Employing appropriate vibration dampening techniques, balancing the driveline components, and using vibration-absorbing materials can help mitigate these issues.
7. Environmental Factors:
– PTO driveline systems may be exposed to various environmental factors, such as dust, debris, moisture, and temperature extremes. These factors can impact the driveline’s performance and longevity. Dust and debris can accumulate in the driveline components, leading to increased friction and wear. Moisture and corrosive environments can cause rust and degradation of driveline parts. Extreme temperatures can affect the lubrication properties and material integrity. Regular inspection, cleaning, and appropriate protection measures are essential to mitigate the impact of environmental factors.
In summary, while PTO driveline systems offer significant advantages, there are limitations and challenges that need to be addressed for safe and efficient operation. These include safety risks, maintenance requirements, alignment considerations, compatibility issues, torque overload protection, noise and vibration management, and the impact of environmental factors. By understanding and addressing these challenges, operators can ensure the proper functioning and longevity of PTO driveline systems.
How do PTO drivelines handle variations in speed, torque, and angles during operation?
PTO (Power Take-Off) drivelines are designed to handle variations in speed, torque, and angles during operation, ensuring efficient power transmission between the power source (such as a tractor engine) and the driven equipment. Here’s how PTO drivelines handle these variations:
Variations in Speed:
PTO drivelines accommodate variations in speed through the use of different mechanisms, depending on the type of driveline. Here are two common methods:
1. Constant Velocity (CV) Joints: CV joints are commonly used in CV PTO drivelines to maintain a constant speed and smooth power transmission, even when the driven equipment operates at varying angles or speeds. CV joints allow the driveline to transmit power without a significant increase in vibration or power loss. These joints consist of specially designed bearings and races that allow for a constant angular velocity, regardless of the operating angle of the driveline. This ensures that the driven equipment receives a consistent and uniform power supply, even as the speed varies.
2. Variable Pulleys or Clutches: In some non-CV PTO drivelines or applications, variable pulleys or clutches can be used to adjust the speed ratio between the power source and the driven equipment. By changing the position of the pulleys or adjusting the clutch engagement, the effective diameter of the pulleys or the contact area of the clutch can be altered, allowing for speed adjustments. This enables operators to match the speed of the driven equipment to the desired operational requirements, accommodating variations in speed during operation.
Variations in Torque:
PTO drivelines are designed to handle variations in torque, ensuring efficient power transmission even when the torque requirements change. Here are two common methods used to handle torque variations:
1. Slip Clutches: Slip clutches are commonly used in PTO drivelines to protect the driveline and driven equipment from excessive torque or sudden shock loads. These clutches incorporate a mechanism that allows the driveline to slip or disengage momentarily when the torque exceeds a certain threshold. This slipping action protects against damage by relieving the excess torque and allows the equipment to continue operating once the resistance is removed. Slip clutches provide a safety measure to prevent driveline and equipment damage due to sudden changes in torque.
2. Shear Bolts: Shear bolts are another method used to handle torque variations in PTO drivelines. These bolts are designed to break and disconnect the power transmission when the torque exceeds a certain threshold. By breaking the shear bolts, the driveline and equipment are protected from excessive torque, preventing damage. Shear bolts are commonly used in applications where sudden obstructions or excessive loads can occur, such as in rotary cutters or flail mowers.
Variations in Angles:
PTO drivelines are engineered to accommodate variations in operating angles. Here’s how they handle angle variations:
1. Flexible Design: PTO drivelines are often designed with flexibility in mind, allowing for slight misalignments and variations in operating angles. Flexible couplings or telescopic sections within the driveline can help compensate for angular misalignments, ensuring smooth power transmission even when the driven equipment operates at an angle. These flexible components can absorb and accommodate the movement and misalignment between the power source and the driven equipment, reducing stress and potential damage to the driveline.
2. Articulating Joints: Some PTO drivelines incorporate articulating joints, such as universal joints or CV joints, to handle variations in operating angles. These joints allow for movement and flexibility, accommodating changes in angle without compromising power transmission. Universal joints can handle up to 30 degrees of angular misalignment, while CV joints can handle even greater angles, providing a smooth and continuous power transfer across a range of operating angles.
By incorporating these design features and mechanisms, PTO drivelines effectively handle variations in speed, torque, and angles during operation. This ensures reliable and efficient power transmission between the power source and the driven equipment, allowing for optimal performance and productivity in a wide range of agricultural and industrial applications.
editor by CX 2024-04-16
China high quality CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft Drive Line
Product Description
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Product Description
Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.HOE LONG IS YOUR DELIVERY TIME AND SHIPMENT?
30-45days
| Type: | Pto Shaft |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| Material: | 45cr Steel |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What maintenance practices are essential for prolonging the lifespan of driveline components?
Implementing proper maintenance practices is crucial for ensuring the longevity and optimal performance of driveline components. Regular maintenance helps identify potential issues, prevent major failures, and prolong the lifespan of driveline components. Here are some essential maintenance practices for prolonging the lifespan of driveline components:
1. Regular Inspections:
Performing regular visual inspections of driveline components is essential for detecting any signs of wear, damage, or misalignment. Inspect the driveline components, including driveshafts, universal joints, CV joints, differentials, and transmission components, for any cracks, leaks, excessive play, or unusual noise. Identifying and addressing issues early can prevent further damage and potential driveline failure.
2. Lubrication:
Proper lubrication of driveline components is crucial for minimizing friction, reducing wear, and ensuring smooth operation. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate type and grade of lubricant. Regularly check and maintain the lubrication levels in components such as bearings, gears, and joints to prevent excessive heat buildup and premature wear.
3. Fluid Changes:
Fluids play a vital role in driveline component performance and longevity. Regularly change fluids, such as transmission fluid, differential oil, and transfer case fluid, according to the manufacturer’s recommended intervals. Over time, these fluids can become contaminated or break down, leading to compromised performance and increased wear. Fresh fluids help maintain proper lubrication, cooling, and protection of driveline components.
4. Alignment and Balancing:
Proper alignment and balancing of driveline components are essential for minimizing vibration, reducing stress, and preventing premature wear. Periodically check and adjust the alignment of driveshafts, ensuring they are properly aligned with the transmission and differential. Additionally, balance rotating components, such as driveshafts or flywheels, to minimize vibrations and prevent excessive stress on driveline components.
5. Torque Check:
Regularly check and ensure that all driveline components are properly torqued according to the manufacturer’s specifications. Over time, fasteners can loosen due to vibrations or thermal expansion and contraction. Loose fasteners can lead to misalignment, excessive play, or even component failure. Regular torque checks help maintain the integrity and performance of the driveline system.
6. Maintenance of Supporting Systems:
Driveline components rely on the proper functioning of supporting systems, such as cooling systems and electrical systems. Ensure that cooling systems are functioning correctly, as overheating can cause driveline components to degrade or fail. Additionally, regularly inspect electrical connections, wiring harnesses, and sensors to ensure proper communication and operation of driveline components.
7. Proper Driving Techniques:
The way a vehicle is driven can significantly impact the lifespan of driveline components. Avoid aggressive driving, sudden acceleration, and excessive braking, as these actions can put undue stress on the driveline components. Smooth and gradual acceleration, proper shifting techniques, and avoiding excessive load or towing capacities help minimize wear and prolong component life.
8. Service and Maintenance Records:
Maintain comprehensive service and maintenance records for the driveline components. Keep track of all maintenance tasks, repairs, fluid changes, and inspections performed. These records help ensure that maintenance tasks are performed on time, provide a history of component performance, and assist in diagnosing any recurring issues or patterns.
By following these maintenance practices, vehicle owners can prolong the lifespan of driveline components, minimize the risk of failures, and ensure optimal performance and reliability of the driveline system.
How do drivelines handle variations in speed and direction during operation?
Drivelines are designed to handle variations in speed and direction during operation, enabling the efficient transfer of power from the engine to the wheels. They employ various components and mechanisms to accommodate these variations and ensure smooth and reliable power transmission. Let’s explore how drivelines handle speed and direction variations:
1. Transmissions:
Transmissions play a crucial role in managing speed variations in drivelines. They allow for the selection of different gear ratios to match the engine’s torque and speed with the desired vehicle speed. By shifting gears, the transmission adjusts the rotational speed and torque delivered to the driveline, enabling the vehicle to operate effectively at various speeds. Transmissions can be manual, automatic, or continuously variable, each with its own mechanism for achieving speed variation control.
2. Clutches:
Clutches are used in drivelines to engage or disengage power transmission between the engine and the driveline components. They allow for smooth engagement during startup and shifting gears, as well as for disconnecting the driveline when the vehicle is stationary or the engine is idling. Clutches facilitate the control of speed variations by providing a means to temporarily interrupt power flow and smoothly transfer torque between rotating components.
3. Differential:
The differential is a key component in drivelines, particularly in vehicles with multiple driven wheels. It allows the wheels to rotate at different speeds while maintaining power transfer. When a vehicle turns, the inside and outside wheels travel different distances and need to rotate at different speeds. The differential allows for this speed variation by distributing torque between the wheels, ensuring smooth operation and preventing tire scrubbing or driveline binding.
4. Universal Joints and CV Joints:
Universal joints and constant velocity (CV) joints are used in drivelines to accommodate variations in direction. Universal joints are typically employed in drivelines with a driveshaft, allowing for the transmission of rotational motion even when there is an angular misalignment between the driving and driven components. CV joints, on the other hand, are used in drivelines that require constant velocity and smooth power transfer at varying angles, such as front-wheel drive vehicles. These joints allow for a consistent transfer of torque while accommodating changes in direction.
5. Transfer Cases:
In drivelines with multiple axles or drivetrains, transfer cases are used to distribute power and torque to different wheels or axles. Transfer cases are commonly found in four-wheel drive or all-wheel drive systems. They allow for variations in speed and direction by proportionally distributing torque between the front and rear wheels, or between different axles, based on the traction requirements of the vehicle.
6. Electronic Control Systems:
Modern drivelines often incorporate electronic control systems to further enhance speed and direction control. These systems utilize sensors, actuators, and computer algorithms to monitor and adjust power distribution, shift points, and torque delivery based on various inputs, such as vehicle speed, throttle position, wheel slip, and road conditions. Electronic control systems enable precise and dynamic management of speed and direction variations, improving traction, fuel efficiency, and overall driveline performance.
By integrating transmissions, clutches, differentials, universal joints, CV joints, transfer cases, and electronic control systems, drivelines effectively handle variations in speed and direction during operation. These components and mechanisms work together to ensure smooth power transmission, optimized performance, and enhanced vehicle control in a wide range of driving conditions and applications.
Can you explain the components of a typical driveline and their specific roles?
A typical driveline consists of several components that work together to transmit power from the engine or power source to the driven components, enabling motion and providing torque. Each component plays a specific role in the driveline system. Here’s an explanation of the key components of a typical driveline and their specific roles:
1. Engine: The engine is the power source of the driveline system. It converts fuel energy (such as gasoline or diesel) into mechanical power by the process of combustion. The engine generates rotational power, which is transferred to the driveline to initiate power transmission.
2. Transmission: The transmission is responsible for selecting the appropriate gear ratio and transmitting power from the engine to the driven components. It allows the driver or operator to control the speed and torque output of the driveline. In manual transmissions, the driver manually selects the gears, while in automatic transmissions, the gear shifts are controlled by the vehicle’s computer system.
3. Drive Shaft: The drive shaft, also known as a propeller shaft or prop shaft, is a tubular component that transmits rotational power from the transmission to the differential or the driven components. It typically consists of a hollow metal tube with universal joints at both ends to accommodate variations in driveline angles and allow for smooth power transfer.
4. Differential: The differential is a gearbox-like component that distributes power from the drive shaft to the wheels or driven axles while allowing them to rotate at different speeds, particularly during turns. It compensates for the difference in rotational speed between the inner and outer wheels in a turn, ensuring smooth and controlled operation of the driveline system.
5. Axles: Axles are shafts that connect the differential to the wheels. They transmit power from the differential to the wheels, allowing them to rotate and generate motion. In vehicles with independent suspension, each wheel typically has its own axle, while in solid axle configurations, a single axle connects both wheels on an axle assembly.
6. Clutch: In manual transmission systems, a clutch is employed to engage or disengage the engine’s power from the driveline. It allows the driver to smoothly engage the engine’s power to the transmission when shifting gears or coming to a stop. By disengaging the clutch, power transmission to the driveline is temporarily interrupted, enabling gear changes or vehicle stationary positions.
7. Torque Converter: Torque converters are used in automatic transmissions to transfer power from the engine to the transmission. They provide a fluid coupling between the engine and transmission, allowing for smooth power transmission and torque multiplication. The torque converter also provides a torque amplification effect, which helps in vehicle acceleration.
8. Universal Joints: Universal joints, also known as U-joints, are flexible couplings used in the driveline to accommodate variations in angles and misalignments between the components. They allow for the smooth transmission of power between the drive shaft and other components, compensating for changes in driveline angles during vehicle operation or suspension movement.
9. Constant Velocity Joints (CV Joints): CV joints are specialized joints used in some drivelines, particularly in front-wheel-drive and all-wheel-drive vehicles. They enable smooth power transmission while accommodating variations in angles and allowing the wheels to turn at different speeds. CV joints maintain a constant velocity during rotation, minimizing vibrations and power losses.
10. Transfer Case: A transfer case is a component found in four-wheel-drive and all-wheel-drive systems. It transfers power from the transmission to both the front and rear axles, allowing all wheels to receive power. The transfer case usually includes additional components such as a multi-speed gearbox and differential mechanisms to distribute power effectively to the axles.
These are the key components of a typical driveline and their specific roles. Each component is crucial in transferring power, enabling motion, and ensuring the smooth and efficient operation of vehicles and equipment.
editor by CX 2023-12-11
China Standard Alloy Steel Farm Tractor Spare Parts Components Transmission Systems Forged Tractor Pto Shaft PTO Driveline
Product Description
1
Products
Name: Alloy Steel Farm Tractor Spare Parts Components Transmission Systems Forged Tractor PTO Shaft
Material: 40CrMo
Weight: From .2kg-5kg
Packing: Stand Export Packing
Min order: 1000pcs
Customized production is available as your drawings or sample.
| Process | Die Forging | |
| Material | Stainless Steel, Carbon Steel, Alloy Steel | |
| Weight | 0.1Kg~20Kg | |
| Heat Treatment | Quenching, Annealing,Tempering,Normalizing, Quenching and Tempering | |
| Testing instrument | composition testing | Spectrometer, Metallographic microscope |
| Performance testing | Hardness tester, Tensile testing machine | |
| Size Measuring | CMM,Micrometer, Vernier Caliper, Depth Caliper, feeler gauge | |
| Thread Gauge , Height Gauge | ||
| Roughness | Ra1.6~Ra6.3 | |
| Machining Equipment | CNC Center , CNC Machines, Turning, Drilling, Milling, boring machine,Grinding Machines, | |
| Wire EDM,Laser Cutting&Welding, Plasma Cutting &Welding, EDM etc. | ||
| Quality control | Sampling inspection of raw materials and semi-finished products, 100% Inspection of finished products | |
| Surface Treatment | Shot Blast , Powder Coating, Polishing, Galvanized , Chrome Plated | |
| Production Capacity | 60000T / Years | |
| Lead Time | Normally 30 – 45 Days. | |
| Payment Terms | T/T , L/C | |
| Material Standard | ASTM , AISI , DIN , BS, JIS, GB, | |
| Certification | ISO9001:2008, IATF16949:2016 | |
2
Products Quality Control
Quality control involve the inspection and control of incoming materials, production processes, and finished products.
The quality control process includes,
1 First of all, the incoming raw materials with random sampling are analyzed by metallographic microscope to ensure that the chemical composition meets the production requirements
2 Then In the production process, there are QC staffs timely sampling ensure that the products are free of defects in the manufacturing process, and to coordinate and handle any abnormal quality issues may be occurred.
3 The final step of production process is magnetic particle flaw detector of the metal parts to detect it’s hidden crack or other defects.
4 All the finished metal parts is sampled in proportion and sent to the laboratory for various mechanical performance tests and size measurement, and the surface quality is manually 100% inspected.
The relevant testing equipment pictures are as following:
3
Quality Management System Control:
We strictly carry out system management accordance with iso9001 and ts16949 quality standards. And 5S lean production management is implemented on the production site.
The production management site as following:
4
Our Advantages:
Brand
Our parent company, HiHangZhou Group, is a world-renowned high-end machinery manufacturing enterprise with 40 domestic subsidiaries and branches and 8 foreign manufacturing plants. Has long-term experience and good reputation in cooperation with world-renowned enterprises.
Technology
We have a complete production process and equipment research and development capabilities for ferrous metals forming. More than 25 years of production experience in forging equipment and casting equipment manufacturers, make us more thoroughly get all the performance of each equipment. One-third of our company’s employees are technician and R&D personnel, ensuring that high-quality products are produced with high efficiency.
Service
We can provide custom and standard manufacturing services with multiple manufacturing process integrations. The quality and delivery of products can be fully guaranteed, and the ability to communicate quickly and effectively.
Culture
The unique corporate culture can give full play to the potential of individuals and provide a strong vitality for the sustainable development of the company.
Social responsibility
Our company strictly implements low-carbon environmental protection, energy-saving and emission-reduction production, and is a benchmark enterprise in local region.
5
Company Culture
Our Vision
To become 1 of the leading companies
Our Mission
To become a platform for employees to realize their dream
To become 1 of the transforming and upgrading pacemaker of Chinese enterprises
To set the national brands with pride
Our Belief
Strive to build the company into an ideal platform for entrepreneurs to realize their self-worth and contribute to the society
Values
Improvement is innovation, everyone can innovate
innovation inspired and failures tolerated
6
FAQ
1.
Q: Are you a trading company or a manufacturer?
A: Obviously we are a manufacturer of forging products, casting products and also have a high level of machining capabilities.
2.
Q: What series products do your have?
A: We are mainly engaged in forming processing of ferrous metals, including processing by casting , forging and machining. As you know, such machinery parts can be observed in various industries of equipment manufacturing.
3
Q: Do you provide samples? is it free?
A: Yes, we commonly provide samples according to the traditional practice, but we also need customers to provide a freight pay-by-account number to show mutual CHINAMFG of cooperation.
4
Q: Is OEM available?
A: Yes, OEM is available.
5
Q: What’s your quality guarantee?
A: We insist that the survival of the company should depend on the products quality continuous improvement, without which we cannot survive for long. We carry out strictly product quality control for every process from incoming materials, production process to finished products via advanced detection instrument and equipment. We also invite independent third parties to certify our quality and management systems. Till now we have passed ISO/TS16949 and SGS certification .
6
Q. How about the Packing?
A: We usually use the iron box, or wooden case, also it can be customized according to customer’s demands.
7
Q: What is your minimum order quantity?
A: Yes, we require all international orders to have an minimum order quantity. The quantity is up to the exact products feature or property such as the material, weight, construction etc.
8
Q: What is the lead time?
A: Generally our forging products and casting products need to make new dies or molds, the time of making new dies or molds and samples within 30-45 days, and the large batch production time within 30-45 days. it’s also according to the parts structural complexity and quantity.
9
Q: What kinds of payment methods do you accept?
A: You can make the payment by T/T or L/C. 30% deposit in advance, 70% balance against the copy of B/L.
| Processing Object: | Metal |
|---|---|
| Molding Style: | Forging |
| Molding Technics: | Pressure Casting |
| Application: | Agricultural Machinery Parts |
| Material: | Steel |
| Heat Treatment: | Tempering |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do manufacturers ensure the compatibility of PTO drivelines with diverse equipment?
Manufacturers employ various methods and considerations to ensure the compatibility of PTO (Power Take-Off) drivelines with diverse equipment. Here are the key factors they take into account:
1. Standardization:
– PTO drivelines are built according to standardized specifications and dimensions. Manufacturers adhere to industry standards and guidelines, such as those set by organizations like the American Society of Agricultural and Biological Engineers (ASABE) and the International Organization for Standardization (ISO). These standards define key parameters like shaft dimensions, connection types, torque ratings, and safety requirements. By following these standards, manufacturers ensure that their PTO drivelines can be easily interchanged and connected with diverse equipment that adheres to the same standards.
2. Compatibility Testing:
– Manufacturers conduct extensive compatibility testing to verify the performance and suitability of their PTO drivelines with different types of equipment. This testing involves connecting the drivelines to various implements, machines, and power sources to assess factors like power transfer efficiency, alignment, torque handling, and safety. Compatibility testing helps identify any issues or limitations that may arise when connecting the drivelines to different equipment. Manufacturers can then make necessary adjustments or recommendations to ensure optimal compatibility.
3. Application-Specific Design:
– Manufacturers often design PTO drivelines with specific applications in mind. They consider the requirements and operating conditions of various equipment categories, such as agricultural machinery, construction equipment, or industrial machinery. Manufacturers may offer different models or configurations of PTO drivelines tailored to these specific applications. For example, agricultural PTO drivelines may have features like enhanced dust resistance, rugged construction, and additional safety measures, while industrial PTO drivelines may prioritize high torque capacity and durability for heavy-duty applications. By designing drivelines with application-specific considerations, manufacturers ensure that their products meet the unique demands of diverse equipment types.
4. Consultation and Collaboration:
– Manufacturers maintain close relationships and collaborations with equipment manufacturers and suppliers. This collaboration allows them to exchange information about equipment requirements and driveline specifications. By understanding the specific needs of different equipment, manufacturers can develop PTO drivelines that align with those requirements. They may also provide technical support and guidance to equipment manufacturers regarding the selection and integration of PTO drivelines into their products. This consultation and collaboration foster compatibility and ensure that the drivelines are suitable for the intended equipment.
5. Documentation and Guidelines:
– Manufacturers provide detailed documentation, user manuals, and guidelines that outline the compatibility aspects of their PTO drivelines. These resources specify the recommended equipment types, connection methods, torque limits, and other important considerations for proper integration. Operators and equipment manufacturers can refer to these documents to ensure the compatibility of the PTO drivelines with diverse equipment. Manufacturers may also offer technical support or customer service channels to address any compatibility-related questions or concerns.
6. Ongoing Research and Development:
– Manufacturers continuously invest in research and development to improve the compatibility of their PTO drivelines with evolving equipment technologies. They stay updated with industry trends, technological advancements, and changing equipment requirements. This allows them to adapt and innovate their driveline designs, materials, and manufacturing processes to ensure ongoing compatibility with new and emerging equipment types and applications.
In summary, manufacturers ensure the compatibility of PTO drivelines with diverse equipment through standardization, compatibility testing, application-specific design, consultation and collaboration with equipment manufacturers, documentation and guidelines, and ongoing research and development. These efforts enable manufacturers to provide drivelines that effectively and safely interface with a wide range of equipment, promoting seamless integration and reliable power transfer.
What safety precautions should operators follow when working with PTO drivelines?
Working with PTO (Power Take-Off) drivelines requires careful attention to safety due to the potential hazards associated with rotating components and high levels of torque. Operators should follow specific safety precautions to minimize the risk of accidents and injuries. Here are the key safety precautions that operators should follow when working with PTO drivelines:
1. Read and Follow Manufacturer’s Instructions:
– Operators should thoroughly read and understand the manufacturer’s instructions and safety guidelines provided for the specific PTO driveline and equipment they are operating. These instructions typically cover proper installation, operation, maintenance, and safety precautions specific to the equipment. Following the manufacturer’s guidelines ensures that the equipment is used correctly and reduces the risk of accidents.
2. Wear Appropriate Personal Protective Equipment (PPE):
– Operators should always wear the appropriate personal protective equipment (PPE) when working with PTO drivelines. This includes items such as safety glasses, protective gloves, sturdy footwear, and clothing that covers the body. PPE helps protect against flying debris, accidental contact with rotating components, and other potential hazards.
3. Ensure Proper Guarding and Shielding:
– PTO drivelines should be equipped with proper guarding and shielding to prevent accidental contact with rotating or moving parts. Operators should ensure that all guards and shields are in place and properly secured before operating the equipment. Guards and shields help contain debris, reduce the risk of entanglement, and protect against accidental contact with the driveline components.
4. Avoid Loose-Fitting Clothing and Jewelry:
– Operators should avoid wearing loose-fitting clothing, jewelry, or any other items that could get caught in the driveline components. Loose clothing or jewelry can be pulled into the rotating parts, resulting in entanglement or serious injuries. It is important to wear fitted clothing and remove any dangling accessories before operating the equipment.
5. Engage PTO Only When Necessary:
– Operators should engage the PTO only when necessary and disengage it when the equipment is not in use. Engaging the PTO while personnel are near the driveline increases the risk of accidental contact and injuries. The PTO should be engaged only when the equipment is properly set up, and all personnel are at a safe distance.
6. Be Aware of Surroundings:
– Operators should always be aware of their surroundings and ensure that no one is near the driveline before starting or operating the equipment. It is crucial to maintain a safe distance from the driveline and keep bystanders away to prevent accidental contact and injuries.
7. Shut Down Equipment Before Servicing:
– Before performing any maintenance or servicing tasks on the equipment or the PTO driveline, operators should shut down the equipment and disable the power source. This ensures that the driveline components are not in motion and reduces the risk of accidental startup or contact with moving parts.
8. Regular Maintenance and Inspection:
– Operators should adhere to a regular maintenance and inspection schedule for the PTO driveline and associated equipment. This includes checking for any signs of wear, damage, or loose connections. Regular maintenance helps identify potential issues before they become safety hazards and ensures that the driveline operates properly.
9. Receive Proper Training:
– Operators should receive proper training on the safe operation of the equipment and the PTO driveline. Training should cover topics such as equipment setup, safe operating procedures, emergency shut-off procedures, and the recognition of potential hazards. Well-trained operators are more likely to operate the equipment safely and respond appropriately in case of emergencies.
10. Follow Lockout/Tagout Procedures:
– When performing maintenance or repair tasks that require accessing the driveline components, operators should follow lockout/tagout procedures. This involves isolating the power source, applying locks and tags to prevent accidental startup, and verifying that the equipment is de-energized before beginning any work. Lockout/tagout procedures are essential for preventing unexpected energization and protecting personnel from hazardous energy.
By following these safety precautions, operators can minimize the risk of accidents and injuries when working with PTO drivelines. Safety should always be a priority, and operators should remain vigilant, adhere to proper procedures, and use common sense to ensure a safe working environment.
How do PTO drivelines handle variations in speed, torque, and angles during operation?
PTO (Power Take-Off) drivelines are designed to handle variations in speed, torque, and angles during operation, ensuring efficient power transmission between the power source (such as a tractor engine) and the driven equipment. Here’s how PTO drivelines handle these variations:
Variations in Speed:
PTO drivelines accommodate variations in speed through the use of different mechanisms, depending on the type of driveline. Here are two common methods:
1. Constant Velocity (CV) Joints: CV joints are commonly used in CV PTO drivelines to maintain a constant speed and smooth power transmission, even when the driven equipment operates at varying angles or speeds. CV joints allow the driveline to transmit power without a significant increase in vibration or power loss. These joints consist of specially designed bearings and races that allow for a constant angular velocity, regardless of the operating angle of the driveline. This ensures that the driven equipment receives a consistent and uniform power supply, even as the speed varies.
2. Variable Pulleys or Clutches: In some non-CV PTO drivelines or applications, variable pulleys or clutches can be used to adjust the speed ratio between the power source and the driven equipment. By changing the position of the pulleys or adjusting the clutch engagement, the effective diameter of the pulleys or the contact area of the clutch can be altered, allowing for speed adjustments. This enables operators to match the speed of the driven equipment to the desired operational requirements, accommodating variations in speed during operation.
Variations in Torque:
PTO drivelines are designed to handle variations in torque, ensuring efficient power transmission even when the torque requirements change. Here are two common methods used to handle torque variations:
1. Slip Clutches: Slip clutches are commonly used in PTO drivelines to protect the driveline and driven equipment from excessive torque or sudden shock loads. These clutches incorporate a mechanism that allows the driveline to slip or disengage momentarily when the torque exceeds a certain threshold. This slipping action protects against damage by relieving the excess torque and allows the equipment to continue operating once the resistance is removed. Slip clutches provide a safety measure to prevent driveline and equipment damage due to sudden changes in torque.
2. Shear Bolts: Shear bolts are another method used to handle torque variations in PTO drivelines. These bolts are designed to break and disconnect the power transmission when the torque exceeds a certain threshold. By breaking the shear bolts, the driveline and equipment are protected from excessive torque, preventing damage. Shear bolts are commonly used in applications where sudden obstructions or excessive loads can occur, such as in rotary cutters or flail mowers.
Variations in Angles:
PTO drivelines are engineered to accommodate variations in operating angles. Here’s how they handle angle variations:
1. Flexible Design: PTO drivelines are often designed with flexibility in mind, allowing for slight misalignments and variations in operating angles. Flexible couplings or telescopic sections within the driveline can help compensate for angular misalignments, ensuring smooth power transmission even when the driven equipment operates at an angle. These flexible components can absorb and accommodate the movement and misalignment between the power source and the driven equipment, reducing stress and potential damage to the driveline.
2. Articulating Joints: Some PTO drivelines incorporate articulating joints, such as universal joints or CV joints, to handle variations in operating angles. These joints allow for movement and flexibility, accommodating changes in angle without compromising power transmission. Universal joints can handle up to 30 degrees of angular misalignment, while CV joints can handle even greater angles, providing a smooth and continuous power transfer across a range of operating angles.
By incorporating these design features and mechanisms, PTO drivelines effectively handle variations in speed, torque, and angles during operation. This ensures reliable and efficient power transmission between the power source and the driven equipment, allowing for optimal performance and productivity in a wide range of agricultural and industrial applications.
editor by CX 2023-10-01
China 8.05.01B Splined yoke, PTO Drive Shaft (Triangular tube, Lemon tube) Cross journal for Wide Angle Joint for farm tractor parts pto shaft extension tractor supply
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
custom drive shaft shop 
editor by Cx 2023-07-03
China Farm Tractor Parts Agriculture Pto Drive Cardan Shaft pto shaft dimensions
Item Description
Agriculture Cardan plastic guard tractor PTO shaft
1)Material: Spring metal, 65Mn, 60Si2Mn &lparSup6), 28SiMnB
two)Process: Cast
three)Heat treatment: Normalized-hardened and tempered
four)Hardness: 40 – 50HRC
five)Working several hours: two hundred-250 hrs.
Lefa has produced many spare components for Japanese utilised tractors in the earlier 11 years. We developed the parts according to samples supplied by consumers.
Lefa Tractor Areas positive aspects:
one. Most parts we have drawings. We can provide assemble drawing for your checking.
2. Most components are in inventory. You can examine the inventory with us if you require.
3. Sample order also suitable ahead of bulk get.
4. Situated in HangZhou, only 1 hour distance to ZheJiang .
5. Europe market place: We have Europe branch in France. We maintain some inventory in France.
PTO shaft Strategy information:
FAQ:
Q1: Can I purchase small quantity of your areas for Sample&quest
A: Of course, we can offer you sample if we have inventory, and will ship you by DHL, FEDEX according to your requirements, or uncover the cheapest Forwards for you.
Q2&semi How could I know if the merchandise suited for my tractor or not&quest
A: Remember to tell us which solution you are fascinated in. We will provide you the primary sizes, or you can offer your drawings or samples, we will make in accordance to your ask for.
Q3: I want to find a provider for my new merchandise. Can you help me&quest
A: Sure. Please kindly supply me your drawings or samples. Our engineer will make the drawing and develop for you. We will quotation you the expense.
Q4: How lengthy for you to make a new item&quest
A: Generally 20-35days for the drawing types and 35-forty days for the sampled kinds.
Co-operation Coverage:
1. Sample Plan: You can test the top quality of our sample firstly prior to you purchase them in mass quantity.
2. Payment Way: T&solT, L&solC, Western Union, Paypal.
three. Shipping and delivery Day: 10-thirty days after deposit paid out. It count on your order amount.
four. Transport Way: By Sea or By Air.
| Japanese tractor spare areas in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor website link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14&solF15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor drinking water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |
| Product Name: | Shaft |
|---|---|
| Brand Name: | Lefa |
| Model: | 04b-Lf-800 |
| Application: | Tractors |
| Delivery Date: | 22-25working Days |
| Color: | Yellow |
###
| Customization: |
Available
|
|---|
###
| Japanese tractor spare parts in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14/F15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |
| Product Name: | Shaft |
|---|---|
| Brand Name: | Lefa |
| Model: | 04b-Lf-800 |
| Application: | Tractors |
| Delivery Date: | 22-25working Days |
| Color: | Yellow |
###
| Customization: |
Available
|
|---|
###
| Japanese tractor spare parts in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14/F15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by czh 2023-01-18
China high quality agriculture machinery mini farm tractor mounted green machine road snow sweepers for sale agricultural parts direct
Equipment Kind: Flooring Sweeper
Relevant Industries: Producing Plant, Machinery Fix Retailers, Farms, House Use, Building functions
Online video outgoing-inspection: Supplied
Equipment Examination Report: Provided
Warranty of core factors: 1 Yr
Main Components: Bearing, Equipment
Condition: New
Gas: Diesel
Use: Snow Clearning, Sweeping highway, P series Heavy Obligation Mixer Hydraulic Geared Motor Planetary Gearbox Velocity Reducer avenue
Cleansing Process: brush
Cleaning Sort: TRACTOR PTO Pushed Clearning
Substance: Metal / Coil
Energy: 20-150hp
Dimension(L*W*H): 1330mm*900mm*1200mm
Guarantee: 1 Yr
Excess weight (KG): 550 kg
Type: Experience-on, mounted with tractors
Item title: tractor mounted street sweeper
Colour: Underneath Client’s Instruction
Purpose: Sweeping snow, street
functioning width: 1500mmm
Composition bodyweight:: 180kgs
Brush material: PP Blended Steel
brush rotation speed: a hundred and eighty rpm
Driveline specification:: Motor/pto drive
Connecting technique with tractor: 3-point suspension
Packaging Particulars: IRON Bundle
Port: HangZhou PORT
Items Description actor highway sweeper: 1. SX Collection Snow Sweeper for tractor is used for sweeping of thin layer of snow, showcased with fast velocity, higher effectiveness andeasy procedure. To distinct away deep snow, it will be far more successful to use it with each other with snow blade. It is also used in sweepingon street and floor.2. SX Series Snow Sweeper for tractor is commonly employed in highway, Custom Substantial Quality Agriculture Equipment Tractor Elements Driveline Cardan Drive PTO Shaft ground, warehouse and so forth, mostly in sweeping of skinny layer of snow,leaves, sand, courtroom and so forth.3.The snow sweeper can be matched to tractor,wheel loader, Stober K514SG3000EK501U Gear Head Velocity Reducers forklift,4.The snow sweeper driven by hydraulic output of these equipment,only tractor could be pushed by PTO.5.PP with metal wires brushes.6.Working width from 1200 to 2500mm7.Suited for cleansing highway,avenue,floor and other flat. Product Technical specs
| Model | SX-150 | SX-one hundred sixty five | SX-a hundred and eighty | SX-210 | ||
| Matching tractor | 20-40hp | 40-60hp | 70-80hp | 85hp-120hp | ||
| Hoisting device | 3-stage | |||||
| Sweeping width （mm） | 1500 | 1650 | 1800 | 2100 | ||
| Brush roller length（mm） | 1740 | 1910 | 2100 | 2450 | ||
| Sweeping thickness（mm） | 0～60 | 0～60 | 0～60 | 0～60 | ||
| Sweeping speed （km/h） | 5～15 | 5～15 | 5～15 | 0～60 | ||
| Brush roller diameter（mm） | 500 | 500 | 500 | 5～15 | ||
| Sweeping angle | 30° | 30° | 30° K37 helical bevel gear motor 3 phase motor pace reducer gearbox large torque pace reducer gearbox | 500 | ||
| Max. transportation height（mm） | 500 | 550 | 600 | 30° | ||
Calculating the Deflection of a Worm Shaft
In this article, we’ll discuss how to calculate the deflection of a worm gear’s worm shaft. We’ll also discuss the characteristics of a worm gear, including its tooth forces. And we’ll cover the important characteristics of a worm gear. Read on to learn more! Here are some things to consider before purchasing a worm gear. We hope you enjoy learning! After reading this article, you’ll be well-equipped to choose a worm gear to match your needs.
Calculation of worm shaft deflection
The main goal of the calculations is to determine the deflection of a worm. Worms are used to turn gears and mechanical devices. This type of transmission uses a worm. The worm diameter and the number of teeth are inputted into the calculation gradually. Then, a table with proper solutions is shown on the screen. After completing the table, you can then move on to the main calculation. You can change the strength parameters as well.
The maximum worm shaft deflection is calculated using the finite element method (FEM). The model has many parameters, including the size of the elements and boundary conditions. The results from these simulations are compared to the corresponding analytical values to calculate the maximum deflection. The result is a table that displays the maximum worm shaft deflection. The tables can be downloaded below. You can also find more information about the different deflection formulas and their applications.
The calculation method used by DIN EN 10084 is based on the hardened cemented worm of 16MnCr5. Then, you can use DIN EN 10084 (CuSn12Ni2-C-GZ) and DIN EN 1982 (CuAl10Fe5Ne5-C-GZ). Then, you can enter the worm face width, either manually or using the auto-suggest option.
Common methods for the calculation of worm shaft deflection provide a good approximation of deflection but do not account for geometric modifications on the worm. While Norgauer’s 2021 approach addresses these issues, it fails to account for the helical winding of the worm teeth and overestimates the stiffening effect of gearing. More sophisticated approaches are required for the efficient design of thin worm shafts.
Worm gears have a low noise and vibration compared to other types of mechanical devices. However, worm gears are often limited by the amount of wear that occurs on the softer worm wheel. Worm shaft deflection is a significant influencing factor for noise and wear. The calculation method for worm gear deflection is available in ISO/TR 14521, DIN 3996, and AGMA 6022.
The worm gear can be designed with a precise transmission ratio. The calculation involves dividing the transmission ratio between more stages in a gearbox. Power transmission input parameters affect the gearing properties, as well as the material of the worm/gear. To achieve a better efficiency, the worm/gear material should match the conditions that are to be experienced. The worm gear can be a self-locking transmission.
The worm gearbox contains several machine elements. The main contributors to the total power loss are the axial loads and bearing losses on the worm shaft. Hence, different bearing configurations are studied. One type includes locating/non-locating bearing arrangements. The other is tapered roller bearings. The worm gear drives are considered when locating versus non-locating bearings. The analysis of worm gear drives is also an investigation of the X-arrangement and four-point contact bearings.
Influence of tooth forces on bending stiffness of a worm gear
The bending stiffness of a worm gear is dependent on tooth forces. Tooth forces increase as the power density increases, but this also leads to increased worm shaft deflection. The resulting deflection can affect efficiency, wear load capacity, and NVH behavior. Continuous improvements in bronze materials, lubricants, and manufacturing quality have enabled worm gear manufacturers to produce increasingly high power densities.
Standardized calculation methods take into account the supporting effect of the toothing on the worm shaft. However, overhung worm gears are not included in the calculation. In addition, the toothing area is not taken into account unless the shaft is designed next to the worm gear. Similarly, the root diameter is treated as the equivalent bending diameter, but this ignores the supporting effect of the worm toothing.
A generalized formula is provided to estimate the STE contribution to vibratory excitation. The results are applicable to any gear with a meshing pattern. It is recommended that engineers test different meshing methods to obtain more accurate results. One way to test tooth-meshing surfaces is to use a finite element stress and mesh subprogram. This software will measure tooth-bending stresses under dynamic loads.
The effect of tooth-brushing and lubricant on bending stiffness can be achieved by increasing the pressure angle of the worm pair. This can reduce tooth bending stresses in the worm gear. A further method is to add a load-loaded tooth-contact analysis (CCTA). This is also used to analyze mismatched ZC1 worm drive. The results obtained with the technique have been widely applied to various types of gearing.
In this study, we found that the ring gear’s bending stiffness is highly influenced by the teeth. The chamfered root of the ring gear is larger than the slot width. Thus, the ring gear’s bending stiffness varies with its tooth width, which increases with the ring wall thickness. Furthermore, a variation in the ring wall thickness of the worm gear causes a greater deviation from the design specification.
To understand the impact of the teeth on the bending stiffness of a worm gear, it is important to know the root shape. Involute teeth are susceptible to bending stress and can break under extreme conditions. A tooth-breakage analysis can control this by determining the root shape and the bending stiffness. The optimization of the root shape directly on the final gear minimizes the bending stress in the involute teeth.
The influence of tooth forces on the bending stiffness of a worm gear was investigated using the CZPT Spiral Bevel Gear Test Facility. In this study, multiple teeth of a spiral bevel pinion were instrumented with strain gages and tested at speeds ranging from static to 14400 RPM. The tests were performed with power levels as high as 540 kW. The results obtained were compared with the analysis of a three-dimensional finite element model.
Characteristics of worm gears
Worm gears are unique types of gears. They feature a variety of characteristics and applications. This article will examine the characteristics and benefits of worm gears. Then, we’ll examine the common applications of worm gears. Let’s take a look! Before we dive in to worm gears, let’s review their capabilities. Hopefully, you’ll see how versatile these gears are.
A worm gear can achieve massive reduction ratios with little effort. By adding circumference to the wheel, the worm can greatly increase its torque and decrease its speed. Conventional gearsets require multiple reductions to achieve the same reduction ratio. Worm gears have fewer moving parts, so there are fewer places for failure. However, they can’t reverse the direction of power. This is because the friction between the worm and wheel makes it impossible to move the worm backwards.
Worm gears are widely used in elevators, hoists, and lifts. They are particularly useful in applications where stopping speed is critical. They can be incorporated with smaller brakes to ensure safety, but shouldn’t be relied upon as a primary braking system. Generally, they are self-locking, so they are a good choice for many applications. They also have many benefits, including increased efficiency and safety.
Worm gears are designed to achieve a specific reduction ratio. They are typically arranged between the input and output shafts of a motor and a load. The two shafts are often positioned at an angle that ensures proper alignment. Worm gear gears have a center spacing of a frame size. The center spacing of the gear and worm shaft determines the axial pitch. For instance, if the gearsets are set at a radial distance, a smaller outer diameter is necessary.
Worm gears’ sliding contact reduces efficiency. But it also ensures quiet operation. The sliding action limits the efficiency of worm gears to 30% to 50%. A few techniques are introduced herein to minimize friction and to produce good entrance and exit gaps. You’ll soon see why they’re such a versatile choice for your needs! So, if you’re considering purchasing a worm gear, make sure you read this article to learn more about its characteristics!
An embodiment of a worm gear is described in FIGS. 19 and 20. An alternate embodiment of the system uses a single motor and a single worm 153. The worm 153 turns a gear which drives an arm 152. The arm 152, in turn, moves the lens/mirr assembly 10 by varying the elevation angle. The motor control unit 114 then tracks the elevation angle of the lens/mirr assembly 10 in relation to the reference position.
The worm wheel and worm are both made of metal. However, the brass worm and wheel are made of brass, which is a yellow metal. Their lubricant selections are more flexible, but they’re limited by additive restrictions due to their yellow metal. Plastic on metal worm gears are generally found in light load applications. The lubricant used depends on the type of plastic, as many types of plastics react to hydrocarbons found in regular lubricant. For this reason, you need a non-reactive lubricant.
